BQ25600 Datasheet, PDF (7/66 Pages) Texas Instruments – I2C Controlled 3.0-A, Single Cell Battery Charger With up-to 40-V Overvoltage Protection Controller for High-Input Voltage and Narrow Voltage DC (NVDC) Power Path Management

www.ti.com
bq25600, bq25600D
SLUSCJ4 – JUNE 2017
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)⁽¹⁾
Voltage Range (with respect to
GND)
VAC
ACDRV
Voltage Range (with respect to
GND)
VBUS (converter not switching)⁽²⁾
Voltage Range (with respect to
GND)
BTST, PMID (converter not switching)⁽²⁾
Voltage Range (with respect to
GND)
SW
Voltage Range (with respect to
GND)
BTST to SW
Voltage Range (with respect to
GND)
PSEL
Voltage Range (with respect to
GND)
D+, D–
Voltage Range (with respect to
GND)
BATSNS (converter not switching)
Voltage Range (with respect to
GND)
REGN, TS, CE, PG, BAT, SYS (converter not switching)
Output Sink Current
STAT
Voltage Range (with respect to
GND)
SDA, SCL, INT, /QON, STAT
Voltage Range (with respect to
GND)
PGND to GND (QFN package only)
Output Sink Current
INT
Operating junction temperature, T_J
Storage temperature, T_stg
MIN
MAX
UNIT
–2
40
V
–0.3
40
V
–2
22
V
–0.3
22
V
–2
16
V
–0.3
7
V
–0.3
7
V
–0.3
7
V
–0.3
7
V
–0.3
7
V
6
mA
–0.3
7
V
–0.3
0.3
V
6
mA
–40
150
°C
–65
150
°C
(1) Stresses beyond those listed under Absolute maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltage
values are with respect to the network ground terminal unless otherwise noted.
(2) VBUS is specified up to 22 V for a maximum of 1 hour at room temperature
6.2 ESD Ratings
V_(ESD)
Electrostatic discharge
Human body model (HBM), per
ANSI/ESDA/JEDEC JS-001, all pins⁽¹⁾
Charged device model (CDM), per
JEDEC specification JESD22-C101, all
pins ⁽²⁾
VALUE
±2000
±250
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
UNIT
V
6.3 Recommended Operating Conditions
V_BUS
I_in
I_SWOP
V_BATOP
I_BATOP
Input voltage
Input current (VBUS)
Output current (SW)
Battery voltage
Fast charging current
MIN
NOM
3.9
MAX
13.5 ⁽¹⁾
3.25
3.25
4.624
3.0
UNIT
V
A
A
V
A
(1) The inherent switching noise voltage spikes should not exceed the absolute maximum voltage rating on either the BTST or SW pins. A
tight layout minimizes switching noise.
Copyright © 2017, Texas Instruments Incorporated
Submit Documentation Feedback
7
Product Folder Links: bq25600 bq25600D