BQ25600 Datasheet, PDF (35/66 Pages) Texas Instruments – I2C Controlled 3.0-A, Single Cell Battery Charger With up-to 40-V Overvoltage Protection Controller for High-Input Voltage and Narrow Voltage DC (NVDC) Power Path Management

www.ti.com
7.4 Register Maps
I²C Slave Address: 6BH
7.4.1 REG00
Bit Field
7
EN_HIZ
6 EN_ICHG_MON[1]
5 EN_ICHG_MON[0]
4 IINDPM[4]
3 IINDPM[3]
2 IINDPM[2]
1 IINDPM[1]
0 IINDPM[0]
bq25600, bq25600D
SLUSCJ4 – JUNE 2017
Table 7. REG00 Field Descriptions
POR Type Reset
Description
0
R/W
by REG_RST
by Watchdog
0 – Disable, 1 – Enable
0 R/W by REG_RST 00 - Enable STAT pin function
(default)
0
R/W by REG_RST ^{11 - Disable STAT pin function}
(float pin)
1 R/W by REG_RST 1600 mA
0 R/W by REG_RST 800 mA
1 R/W by REG_RST 400 mA
1 R/W by REG_RST 200 mA
1 R/W by REG_RST 100 mA
Comment
Enable HIZ Mode
0 – Disable (default)
1 – Enable
IMON pin output:
0 V ≤ V_RANGE ≤ 1.2 V
max Loading = 1 nF / 100 kΩ
Accuracy ±10%
Input Current Limit
Offset: 100 mA
Range: 100 mA (000000) – 3.2 A
(11111)
Default:2400 mA (10111),
maximum input current limit, not
typical.
IINDPM bits are changed
automatically after input source
detection is completed
bq25600D
USB SDP = 500 mA
USB DCP = 2.4 A
Unknown Adapter = 500 mA
Non-Standard Adapter = 1 A, 2 A,
2.1 A, or 2.4 A
bq25600
PSEL = Hi = 500 mA
PSEL = Lo = 2.4 A
Host can over-write IINDPM
register bits after input source
detection is completed.
LEGEND: R/W = Read/Write; R = Read only
Copyright © 2017, Texas Instruments Incorporated
Product Folder Links: bq25600 bq25600D
Submit Documentation Feedback
35