BQ25600 Datasheet, PDF (37/66 Pages) Texas Instruments – I2C Controlled 3.0-A, Single Cell Battery Charger With up-to 40-V Overvoltage Protection Controller for High-Input Voltage and Narrow Voltage DC (NVDC) Power Path Management

www.ti.com
7.4.3 REG02
Bit Field
7 BOOST_LIM
6 Q1_FULLON
5 ICHG[5]
4 ICHG[4]
3 ICHG[3]
2 ICHG[2]
1 ICHG[1]
0 ICHG[0]
bq25600, bq25600D
SLUSCJ4 – JUNE 2017
POR
1
0
1
0
0
0
1
0
Table 9. REG02 Field Descriptions
Type
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Reset
Description
by REG_RST
by Watchdog 0 = 0.5 A
1 = 1.2 A
by REG_RST 0 – Use higher Q1 RDSON when
programmed IINDPM < 700mA
(better accuracy)
1 – Use lower Q1 RDSON always
(better efficiency)
by REG_RST
by Watchdog
1920 mA
by REG_RST
by Watchdog
960 mA
by REG_RST
by Watchdog
480 mA
by REG_RST
by Watchdog
240 mA
by REG_RST
by Watchdog
120 mA
by REG_RST
by Watchdog
60 mA
Comment
Default: 1.2 A (1)
Note:
The current limit options listed are
minimum current limit specs.
In boost mode, full FET is always
used and this bit has no effect
Fast Charge Current
Default: 2040mA (100010)
Range: 0 mA (0000000) – 3000
mA (110010)
Note:
I_CHG = 0 mA disables charge.
I_CHG > 3000 mA (110010 clamped
to register value 3000 mA
(110010))
LEGEND: R/W = Read/Write; R = Read only
Copyright © 2017, Texas Instruments Incorporated
Product Folder Links: bq25600 bq25600D
Submit Documentation Feedback
37