MSP430F5229 Datasheet, PDF (36/121 Pages) Texas Instruments – MSP430F522x and MSP430F521x Mixed-Signal Microcontrollers

MSP430F5229, MSP430F5227, MSP430F5224, MSP430F5222
MSP430F5219, MSP430F5217, MSP430F5214, MSP430F5212
SLAS718E – NOVEMBER 2012 – REVISED MAY 2014
www.ti.com
5.30 PMM, SVM Low Side
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN TYP
SVMLE = 0, PMMCOREV = 2
0
I_(SVML)
SVM_L current consumption
SVMLE= 1, PMMCOREV = 2, SVMLFP = 0
200
SVMLE= 1, PMMCOREV = 2, SVMLFP = 1
1.5
SVMLE = 1, dV_CORE/dt = 10 mV/µs,
SVMLFP = 1
2.5
t_pd(SVML) SVM_L propagation delay
SVMLE = 1, dV_CORE/dt = 1 mV/µs,
SVMLFP = 0
20
t_(SVML)
SVM_L on or off delay time
SVMLE = 0 → 1, dV_CORE/dt = 10 mV/µs,
SVMLFP = 1
SVMLE = 0 → 1, dV_CORE/dt = 1 mV/µs,
SVMLFP = 0
12.5
100
MAX
UNIT
nA
nA
µA
µs
µs
5.31 Wakeup From Low-Power Modes and Reset
over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted)
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNIT
t_WAKE-UP-FAST
Wake-up time from LPM2,
LPM3, or LPM4 to active
mode ⁽¹⁾
PMMCOREV = SVSMLRRL = n
(where n = 0, 1, 2, or 3),
SVSLFP = 1
f_MCLK ≥ 4.0 MHz
1.0 MHz < f_MCLK <
4.0 MHz
3.5 7.5
µs
4.5
9
t_WAKE-UP-SLOW
Wake-up time from LPM2,
LPM3 or LPM4 to active
mode ⁽²⁾
PMMCOREV = SVSMLRRL = n
(where n = 0, 1, 2, or 3),
SVSLFP = 0
150 175 µs
t_WAKE-UP-LPM5
Wake-up time from LPM4.5
to active mode⁽³⁾
2
3 ms
t_{WAKE-UP-RESET}
Wake-up time from RST or
BOR event to active mode⁽³⁾
2
3 ms
(1) This value represents the time from the wakeup event to the first active edge of MCLK. The wakeup time depends on the performance
mode of the low side supervisor (SVS_L) and low side monitor (SVM_L). Fastest wakeup times are possible with SVS_Land SVM_L in full
performance mode or disabled when operating in AM, LPM0, and LPM1. Various options are available for SVS_Land SVM_L while
operating in LPM2, LPM3, and LPM4. See the Power Management Module and Supply Voltage Supervisor chapter in the MSP430x5xx
and MSP430x6xx Family User's Guide (SLAU208).
(2) This value represents the time from the wakeup event to the first active edge of MCLK. The wakeup time depends on the performance
mode of the low side supervisor (SVS_L) and low side monitor (SVM_L). In this case, the SVS_Land SVM_L are in normal mode (low current)
mode when operating in AM, LPM0, and LPM1. Various options are available for SVS_Land SVM_L while operating in LPM2, LPM3, and
LPM4. See the Power Management Module and Supply Voltage Supervisor chapter in the MSP430x5xx and MSP430x6xx Family User's
Guide (SLAU208).
(3) This value represents the time from the wakeup event to the reset vector execution.
36
Specifications
Copyright © 2012–2014, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: MSP430F5229 MSP430F5227 MSP430F5224 MSP430F5222 MSP430F5219 MSP430F5217
MSP430F5214 MSP430F5212