|
DS90UB926Q Datasheet, PDF (27/57 Pages) Texas Instruments – 5 - 85 MHz 24-bit Color FPD-Link III Deserializer with Bidirectional Control Channel | |||
|
◁ |
DS90UB926Q
Repeater Connections
The Repeater requires the following connections between the Receiver and each Transmitter Figure 16.
1) Video Data â Connect PCLK, RGB and control signals (DE, VS, HS).
2) I2C â Connect SCL and SDA signals. Both signals should be pulled up to VDD33 with 4.7 k⦠resistors.
3) Audio â Connect I2S_CLK, I2S_WC, and I2S_DA signals.
4) IDx pin â Each Transmitter and Receiver must have an unique I2C address.
5) MODE_SEL pin â All Transmitter and Receiver must be set into the Repeater Mode.
6) Interrupt pinâ Connect DS90UB926Q INTB_IN pin to DS90UB925Q INTB pin. The signal must be pulled up to VDDIO.
FIGURE 16. Repeater Connection Diagram
30143442
Copyright © 1999-2012, Texas Instruments Incorporated
27
|
▷ |