DS90UB926Q Datasheet, PDF (25/57 Pages) Texas Instruments – 5 - 85 MHz 24-bit Color FPD-Link III Deserializer with Bidirectional Control Channel

DS90UB926Q
REPEATER APPLICATION
The DS90UB925Q and DS90UB926Q can be configured to extend data transmission over multiple links to multiple display devices.
Setting the devices into repeater mode provides a mechanism for transmitting to all receivers in the system.
Repeater Configuration
In a repeater application, In this document, the DS90UB925Q is referred to as the Transmitter or transmit port (TX), and the
DS90UB926Q is referred to as the Receiver (RX). Figure 14 shows the maximum configuration supported for Repeater imple-
mentations using the DS90UB925Q (TX) and DS90UB926Q (RX). Two levels of Repeaters are supported with a maximum of three
Transmitters per Receiver.
FIGURE 14. Maximum Repeater Application
30143410
Copyright © 1999-2012, Texas Instruments Incorporated
25