TMS320DM8127_14 Datasheet, PDF (214/365 Pages) Texas Instruments – DaVinci Video Processors

TMS320DM8127
SPRS712C – JUNE 2012 – REVISED MARCH 2014
www.ti.com
9.1.3 Timing Parameters and Board Routing Analysis
The timing parameter values specified in this data manual do not include delays by board routings. As a
good board design practice, such delays must always be taken into account. Timing values may be
adjusted by increasing/decreasing such delays. TI recommends utilizing the available I/O buffer
information specification (IBIS) models to analyze the timing characteristics correctly. To properly use IBIS
models to attain accurate timing analysis for a given system, see the Using IBIS Models for Timing
Analysis application report (Literature Number: SPRA839). If needed, external logic hardware such as
buffers may be used to compensate any timing differences.
For the DDR2 memory controller interface, it is not necessary to use the IBIS models to analyze timing
characteristics. TI provides a PCB routing rules solution that describes the routing rules to ensure the
DDR2 memory controller interface timings are met.
9.2 Recommended Clock and Control Signal Transition Behavior
All clocks and control signals must transition between V_IH and V_IL (or between V_IL and V_IH) in a monotonic
manner.
214 Peripheral Information and Timings
Copyright © 2012–2014, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: TMS320DM8127