DS90CF366_16 Datasheet, PDF (20/38 Pages) Texas Instruments – DS90CF3x6 3.3-V LVDS Receiver 24-Bit Or 18-Bit Flat Panel Display (FPD) Link, 85 MHz

DS90CF366, DS90CF386
SNLS055J – NOVEMBER 1999 – REVISED MAY 2016
8 Application and Implementation
www.ti.com
NOTE
Information in the following applications sections is not part of the TI component
specification, and TI does not warrant its accuracy or completeness. TI’s customers are
responsible for determining suitability of components for their purposes. Customers should
validate and test their design implementation to confirm system functionality.
8.1 Application Information
The DS90F386 and DS90CF366 are designed for a wide variety of data transmission applications. The use of
serialized LVDS data lines in these applications allows for efficient signal transmission over a narrow bus width,
thereby reducing cost, power, and space.
8.2 Typical Applications
Figure 21 and Figure 22 show typical applications of the DS90CF386 and DS90CF366 for displays when used as
an OpenLDI-to-RGB bridge.
LVDS Cable or PCB Trace
DS90CF386 28-Bit Rx
RxOUT
LVDS Data
[27:0]
100 Ÿ
24-Bit RGB Display Unit
Graphics Processor Unit (GPU)
28-Bit Tx Data
(4 LVDS Data, 1 LVDS Clock)
100 Ÿ
100 Ÿ
100 Ÿ
LVDS
Clock
100 Ÿ
RxCLK
PLL
100 Ÿ
Copyright © 2016, Texas Instruments Incorporated
Figure 21. Typical DS90CF386 Application Block Diagram
LVDS Cable or PCB Trace
DS90CF366 21-Bit Rx
RxOUT[20:0]
LVDS Data
100 Q
18-Bit RGB Display Unit
Graphics Processor Unit
(GPU)
21-Bit Tx Data
(3 LVDS Data, 1 LVDS Clock)
100 Q
100 Q
LVDS Clock
100 Q
RxCLK
PLL
Copyright © 2016, Texas Instruments Incorporated
Figure 22. Typical DS90CF366 Application Block Diagram
20
Submit Documentation Feedback
Copyright © 1999–2016, Texas Instruments Incorporated
Product Folder Links: DS90CF366 DS90CF386