TMS320DM8148_17 Datasheet, PDF (105/377 Pages) Texas Instruments – DaVinci Video Processors

TMS320DM8148, TMS320DM8147
www.ti.com
SPRS647E – MARCH 2011 – REVISED DECEMBER 2013
Table 3-22. McASP5 Terminal Functions
SIGNAL
NAME
TYPE⁽¹⁾ OTHER ^{(2) (3)}
NO.
MUXED
DESCRIPTION
McASP5
MCA[5]_ACLKX/
GP0[25]
J3
I/O
IPD
DVDD
GP0
PINCNTL55
DSIS: 0
McASP5 Transmit Bit Clock I/O
AUD_CLKIN2/
MCA[0]_AXR[9]/
MCA[2]_AHCLKX/
MCA[5]_AHCLKX/ H1
I/O
EDMA_EVT2/
TIM3_IO/
GP0[9]
IPD
DVDD
AUD_CLKIN2,
MCA[0], MCA[2],
EDMA, TIMER3,
GP0
PINCNTL16
DSIS: PIN
McASP5 Transmit High-Frequency Master Clock I/O
MCA[5]_AFSX/
GP0[26]
H5
I/O
IPD
DVDD
GP0
PINCNTL56
DSIS: 0
McASP5 Transmit Frame Sync I/O
MCA[0]_AFSR/
MCA[5]_AXR[3]
K1
I/O
IPD
DVDD
MCA[0]
PINCNTL20
DSIS: PIN
MCA[0]_ACLKR/
MCA[5]_AXR[2]
K2
I/O
MCA[5]_AXR[1]/
MCA[4]_AXR[3]/
TIM7_IO/
L6
I/O
GP0[28]
IPD
DVDD
IPD
DVDD
MCA[0]
PINCNTL19
DSIS: PIN
MCA[4], TIMER7,
GP0
PINCNTL58
DSIS: PIN
McASP5 Transmit/Receive Data I/Os
MCA[5]_AXR[0]/
MCA[4]_AXR[2]/
L7
I/O
GP0[27]
IPD
DVDD
MCA[4], GP0
PINCNTL57
DSIS: PIN
(1) I = Input, O = Output, Z = High impedance, S = Supply voltage, GND = Ground, A = Analog signal, MM = Multi Muxed, DSIS = De-
selected Input State
(2) IPD = Internal Pulldown Active, IPU = Internal Pullup Active, DIS = Internal Pull Disabled. This represents the default state of the
Internal Pull during and after Reset. For more detailed information on pullup/pulldown resistors and situations where external
pullup/pulldown resistors are required, see Section 4.5.1, Pullup/Pulldown Resistors and Section 7.3.17, Pin Behaviors at Reset.
(3) Specifies the operating I/O supply voltage for each signal
Copyright © 2011–2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: TMS320DM8148 TMS320DM8147
Device Pins 105