DS90UB927-Q1 Datasheet, PDF (48/56 Pages) Texas Instruments – 5MHz - 85MHz 24-bit Color FPD-Link III Serializer with Bidirectional Control Channel

DS90UB927-Q1, DS90UB927Q, DS90UB927Q-Q1
SNLS416B – JUNE 2012
ADD
(dec)
123
ADD
(hex)
0x7B
Register Name
Slave Alias[5]
124
0x7C Slave Alias[6]
125
0x7D Slave Alias[7]
198
0xC6 ICR
199
0xC7 ISR
240
0xF0 TX ID
241
0xF1
242
0xF2
243
0xF3
244
0xF4
245
0xF5
www.ti.com
Table 5. Serial Control Bus Registers (continued)
Bit(s)
7:1
0
7:1
0
7:1
0
7:6
5
4:1
7:6
5
4:1
0
7:0
7:0
7:0
7:0
7:0
7:0
Register
Type
RW
RW
RW
RW
R
R
R
R
R
R
R
R
Default
(hex)
0x00
0x00
0x00
0x00
0x00
0x5F
0x55
0x42
0x39
0x32
0x37
Function
Description
Slave Alias ID 5
Slave Alias ID 6
Slave Alias ID 7
IS_RX_INT
IS RX INT
INT Enable
ID0
ID1
ID2
ID3
ID4
ID5
7-bit Remote Slave Device Alias ID 5
Configures the decoder for detecting transactions designated for an
I2C Slave device attached to the remote Deserializer. The transaction
will be remapped to the address specified in the Slave ID5 register. A
value of 0 in this field disables access to the remote I2C Slave.
Reserved
7-bit Remote Slave Device Alias ID 6
Configures the decoder for detecting transactions designated for an
I2C Slave device attached to the remote Deserializer. The transaction
will be remapped to the address specified in the Slave ID6 register. A
value of 0 in this field disables access to the remote I2C Slave.
Reserved
7-bit Remote Slave Device Alias ID 7
Configures the decoder for detecting transactions designated for an
I2C Slave device attached to the remote Deserializer. The transaction
will be remapped to the address specified in the Slave ID7 register. A
value of 0 in this field disables access to the remote I2C Slave.
Reserved
Reserved
Interrupt on Receiver interrupt
Enables interrupt on indication from the Receiver. Allows propagation
of interrupts from downstream devices
Reserved
Reserved
Interrupt on Receiver interrupt
Receiver has indicated an interrupt request from downstream device
Reserved
Global Interrupt Enable
Set if any enabled interrupt is indicated
First byte ID code, ‘_’
Second byte of ID code, ‘U’
Third byte of ID code. ‘B’
Forth byte of ID code: ‘9’
Fifth byte of ID code: “2”
Sixth byte of ID code: “7”
48
Submit Documentation Feedback
Product Folder Links: DS90UB927-Q1 DS90UB927Q DS90UB927Q-Q1
Copyright © 2012, Texas Instruments Incorporated