DS90UB927-Q1 Datasheet, PDF (31/56 Pages) Texas Instruments – 5MHz - 85MHz 24-bit Color FPD-Link III Serializer with Bidirectional Control Channel

www.ti.com
ADD
(dec)
0
ADD
(hex)
0x00
Register Name
I2C Device ID
1
0x01 Reset
Bit(s)
7:1
0
7
6:2
1
0
DS90UB927-Q1, DS90UB927Q, DS90UB927Q-Q1
SNLS416B – JUNE 2012
Table 5. Serial Control Bus Registers
Register
Type
RW
RW
RW
RW
RW
Default
(hex)
IDx
0x00
Function
Description
Device ID
ID Setting
Remote Auto
Power Down
Digital RESET1
Digital RESET0
7–bit address of Serializer
Note: Read-only unless bit 0 is set
I2C ID Setting
0: Device ID is from IDx pin
1: Register I2C Device ID overrides IDx pin
Remote Auto Power Down
0: Do not power down when no Bidirectional Control Channel link is
detected (default)
1: Enable power down when no Bidirectional Control Channel link is
detected
Reserved.
Reset the entire digital block including registers
This bit is self-clearing.
0: Normal operation (default)
1: Reset
Reset the entire digital block except registers
This bit is self-clearing
0: Normal operation (default)
1: Reset
Copyright © 2012, Texas Instruments Incorporated
Product Folder Links: DS90UB927-Q1 DS90UB927Q DS90UB927Q-Q1
Submit Documentation Feedback
31