LMF100_15 Datasheet, PDF (4/40 Pages) Texas Instruments – LMF100 Dual High-Performance Switched Capacitor Filters

LMF100
SNOSBG9B – JULY 1999 – REVISED JUNE 2015
www.ti.com
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)⁽¹⁾
Supply Voltage (V⁺ – V^–)
Voltage at any pin
Input current at any pin⁽²⁾
Package input current⁽²⁾
Power dissipation⁽³⁾
Soldering information⁽⁴⁾
Storage temperature, T_stg
N Package: 10 sec.
SOIC Package
Vapor Phase (60 sec)
Infrared (15 sec)
MIN
MAX
UNIT
16
V
V⁺ + 0.3
V^– – 0.3
V
5
mA
20
mA
500
mW
250
215
°C
220
150
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) When the input voltage (V_IN) at any pin exceeds the power supply rails (V_IN < V^– or the absolute value of current at that pin should be
limited to 5 mA or less. The sum of the currents at all pins that are driven beyond the power supply voltages should not exceed
20 mA.V_IN+)
(3) The maximum power dissipation must be derated at elevated temperatures and is dictated by T_JMAX, R_θJA, and the ambient
temperature, T_A. The maximum allowable power dissipation at any temperature is P_D = (T_JMAX − T_A)/R_θJA or the number given in the
Absolute Maximum Ratings, whichever is lower. For this device, T_JMAX = 125°C, and the typical junction-to-ambient thermal resistance
of the LMF100CIN when board mounted is 55°C/W. For the LMF100CIWM this number is 66°C/W.
(4) See AN-450Surface Mounting Methods and Their Effect on Product Reliability(Appendix D) for other methods of soldering surface
mount devices.
6.2 ESD Ratings
V_(ESD)
Electrostatic discharge Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001⁽¹⁾⁽²⁾
VALUE
±2000
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) A military RETS specification is available upon request.
UNIT
V
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
LMF100CCN
Temperature
LMF100CIWM
Supply voltage
MIN
NOM
0
–40
4 ≤V⁺ – V^– ≤
MAX
70
85
15
UNIT
°C
V
4
Submit Documentation Feedback
Product Folder Links: LMF100
Copyright © 1999–2015, Texas Instruments Incorporated