LMF100_15 Datasheet, PDF (16/40 Pages) Texas Instruments – LMF100 Dual High-Performance Switched Capacitor Filters

LMF100
SNOSBG9B – JULY 1999 – REVISED JUNE 2015
8 Detailed Description
www.ti.com
8.1 Overview
The LMF100 device contains two general-purpose, very high-performance switched capacitor filters that are cost-
effective and space-saving. It enables designers to implement all the classical filters up to fourth-order biquad
with one chip. This switched capacitor filters can be used in a broad range of industrial and consumer application
such as audio, communication, instrumentation, medical, telemetry, etc. It can be directly cascaded to implement
higher order filters,
8.2 Functional Block Diagram
8.3 Feature Description
The LMF100 is an all CMOS switched capacitor filter device that consists of two filters capable of wide supply
range from 4 V to 15 V. It features much higher performance than the pin-compatible MF10 device with operation
frequency to 100 kHz, which is 3X broader, and fo x Q range to 1.8 MHz which is 9X higher. Furthermore, it has
pins that also function to configure filter modes of operation, level shifting, clock to filter center frequency setting,
and power rail selections enabling flexibility and ease of programming.
8.4 Device Functional Modes
8.4.1 Modes of Operation
The LMF100 is a switched capacitor (sampled data) filter. To fully describe its transfer functions, a time domain
analysis is appropriate. Because this is cumbersome, and because the LMF100 closely approximates continuous
filters, the following discussion is based on the well-known frequency domain. Each LMF100 can produce two full
second-order functions. See Table 1 for a summary of the characteristics of the various modes.
16
Submit Documentation Feedback
Product Folder Links: LMF100
Copyright © 1999–2015, Texas Instruments Incorporated