OMAP5912ZZG Datasheet, PDF (32/269 Pages) Texas Instruments – This data sheet revision history highlights the technical changes made to SPRS231D to generate SPRS231E

Introduction
Table 2−1. ZDY/GDY Package Terminal Assignments (Continued)
ZDY/
GDY
BALL
NO.
SIGNAL
ZDY/
GDY
BALL
NO.
SIGNAL
ZDY/
GDY
BALL
NO.
SIGNAL
ZDY/
GDY
BALL
NO.
SIGNAL
MMC.DAT1(0)/
U9
MPUIO10(1)/
U10
OSC32K_OUT
U11
OSC32K_IN
MPUIO7(2)
CLK32K_OUT(0)/
MPUIO0(4)/
U12
USB1.SPEED(5)/
UART1.TX(6)/
GPIO36(7)
Z_STATE^†(0)/
MCBSP3.CLKX(1)/
MCSI1.CLK(0)/
MCBSP3.DX(1)/
UART1.RX(0)/
USB1.TXEN(2)/
U13
UART1.IRRX(2)/
U14 MCSI1.DIN_OUT(3)/
U15
USB1.VM(2)/
U16
GPIO37(7)
MCSI1.DIN(4)/
TDI(3)/
Z_STATE^†(6)/
MCBSP3.CLKX(4)/
GPIO42(7)
GPIO43(7)
EMU0
U17
TDI
† _{Z_STATE = high-impedance}
‡ _{“NC” denotes “No Connect”.}
§ _{LOW_STATE = 0}
¶ _{Signal must be tied low.}
# _{For special consideration with respect to the connection of the VSS pin (ZDY/GDY ball H8), refer to Section 5.5.1, 32-kHz Oscillator and Input}
Clock.
NOTES: 1. Shading denotes signals with multiplexed functions.
2. The number within parenthesis at the end of a signal name denotes the Pin Mux setting (see the MUX CTRL SETTING column
in Table 2−3 and Table 2−4).
32 SPRS231E
December 2003 − Revised December 2005