SMJ320C6701_07 Datasheet, PDF (29/64 Pages) Texas Instruments – FLOATING-POINT DIGITAL SIGNAL PROCESSOR

SMJ320C6701
FLOATINGĆPOINT DIGITAL SIGNAL PROCESSOR
SGUS030B – APRIL 2000 – REVISED MAY 2001
PARAMETER MEASUREMENT INFORMATION
Tester Pin
Electronics
Vref
IOL
50 Ω
Output
Under
Test
CT = 30 pF^†
IOH
† _{Typical distributed load circuit capacitance.}
signal-transition levels
All input and output timing parameters are referenced to 1.5 V for both “0” and “1” logic levels.
Vref = 1.5 V
Figure 7. Input and Output Voltage Reference Levels for ac Timing Measurements
• POST OFFICE BOX 1443 HOUSTON, TEXAS 77251–1443
29