AM1705_15 Datasheet, PDF (137/165 Pages) Texas Instruments – AM1705 ARM® Microprocessor

www.ti.com
AM1705
SPRS657E – FEBRUARY 2010 – REVISED JUNE 2014
Table 6-85. Universal Serial Bus OTG (USB0) Registers (continued)
BYTE ADDRESS
0x01E0 0490
0x01E0 0492
0x01E0 0493
0x01E0 0494
0x01E0 0496
0x01E0 0497
0x01E0 0498
0x01E0 049A
0x01E0 049B
0x01E0 049C
0x01E0 049E
0x01E0 049F
0x01E0 04A0
0x01E0 04A2
0x01E0 04A3
0x01E0 04A4
0x01E0 04A6
0x01E0 04A7
ACRONYM
REGISTER DESCRIPTION
TARGET ENDPOINT 2 CONTROL REGISTERS, VALID ONLY IN HOST MODE
TXFUNCADDR
Address of the target function that has to be accessed through the associated
Transmit Endpoint.
TXHUBADDR
Address of the hub that has to be accessed through the associated Transmit
Endpoint. This is used only when full speed or low speed device is connected via a
USB2.0 high-speed hub.
TXHUBPORT
Port of the hub that has to be accessed through the associated Transmit Endpoint.
This is used only when full speed or low speed device is connected via a USB2.0
high-speed hub.
RXFUNCADDR
Address of the target function that has to be accessed through the associated
Receive Endpoint.
RXHUBADDR
Address of the hub that has to be accessed through the associated Receive
Endpoint. This is used only when full speed or low speed device is connected via a
USB2.0 high-speed hub.
RXHUBPORT
Port of the hub that has to be accessed through the associated Receive Endpoint.
This is used only when full speed or low speed device is connected via a USB2.0
high-speed hub.
TARGET ENDPOINT 3 CONTROL REGISTERS, VALID ONLY IN HOST MODE
TXFUNCADDR
Address of the target function that has to be accessed through the associated
Transmit Endpoint.
TXHUBADDR
Address of the hub that has to be accessed through the associated Transmit
Endpoint. This is used only when full speed or low speed device is connected via a
USB2.0 high-speed hub.
TXHUBPORT
Port of the hub that has to be accessed through the associated Transmit Endpoint.
This is used only when full speed or low speed device is connected via a USB2.0
high-speed hub.
RXFUNCADDR
Address of the target function that has to be accessed through the associated
Receive Endpoint.
RXHUBADDR
Address of the hub that has to be accessed through the associated Receive
Endpoint. This is used only when full speed or low speed device is connected via a
USB2.0 high-speed hub.
RXHUBPORT
Port of the hub that has to be accessed through the associated Receive Endpoint.
This is used only when full speed or low speed device is connected via a USB2.0
high-speed hub.
TARGET ENDPOINT 4 CONTROL REGISTERS, VALID ONLY IN HOST MODE
TXFUNCADDR
Address of the target function that has to be accessed through the associated
Transmit Endpoint.
TXHUBADDR
Address of the hub that has to be accessed through the associated Transmit
Endpoint. This is used only when full speed or low speed device is connected via a
USB2.0 high-speed hub.
TXHUBPORT
Port of the hub that has to be accessed through the associated Transmit Endpoint.
This is used only when full speed or low speed device is connected via a USB2.0
high-speed hub.
RXFUNCADDR
Address of the target function that has to be accessed through the associated
Receive Endpoint.
RXHUBADDR
Address of the hub that has to be accessed through the associated Receive
Endpoint. This is used only when full speed or low speed device is connected via a
USB2.0 high-speed hub.
RXHUBPORT
Port of the hub that has to be accessed through the associated Receive Endpoint.
This is used only when full speed or low speed device is connected via a USB2.0
high-speed hub.
Copyright © 2010–2014, Texas Instruments Incorporated
Peripheral Information and Electrical Specifications 137
Submit Documentation Feedback
Product Folder Links: AM1705