VS6663CC Datasheet, PDF (60/63 Pages) STMicroelectronics – 1.3 megapixel camera module

Application
11 Application
11.1
Schematic
Figure 25. Mobile camera application
VS6663CC
External clock
1.8V
2.8V
VCAP
VS6663CC
. _VDIG
220nF
. _VANA
220nF
EXTCLK _DATA+
DATA-
CLK+
CLK-
3.6V
CHARGE
PUMP
XSHUTDOWN
470nF
VCORE
GND
SCL
SDA
100R
100R
SubLVDS data
SubLVDS clock
1.8V
4.7k
Power down signal
CCI control lines
Notes:
No connection should be made to VCAP.
CCCP2 100R termination may be internal to subLVDS receiver. For CSI-2, the receiver is mandated to have an
internal termination which is dynamically switched in and out depending on whether the link is in HIGH SPEED or
LOW POWER mode. This transition occurs every line.
60/63
Doc ID028526 Rev 1