VS6663CC Datasheet, PDF (23/63 Pages) STMicroelectronics – 1.3 megapixel camera module

VS6663CC
Camera control interface (CCI)
4.2.2
Frame format description registers [0x0040 to 0x007F]
For a full description of the frame format description refer to Chapter 5: Video data interface
on page 35.
Table 11. Frame format description registers [0x0040 to 0x007F]
Index Byte
Register name
Data type Default Type
Comment
0x0040
frame_format_model_type
8C
0x0041
frame_format_model_subtype
8C
0x0042 Hi
frame_format_descriptor_0
16C
0x0043 Lo
0x0044 Hi
frame_format_descriptor_1
16C
0x0045 Lo
0x0046 Hi
frame_format_descriptor_2
16C
0x0047 Lo
01
12
55.10
10.02
53.D0
Generic frame format.
RO
0x01: 2-byte data format.
Contains the number of 2-byte data
format descriptors used.
RO
Upper nibble defines the number of
column descriptors (1).
The lower nibble defines the number
of row descriptors (2)
Pixel data code: 5 (Visible Columns)
Number of pixels : readout
RO ^dependent
(Maximum of 1296)
Number of pixels: 1296
Pixel data code: 1 (Embedded data
RO ^lines)
Number of status lines:2
Pixel data code: 5 (Visible Lines)
number of pixels: readout
RO ^dependent
(Maximum of 976)
Number of pixels: 976
4.2.3
Analog gain description registers [0x0080 to 0x0093]
For a full description of the analog gain description registers refer to Chapter 6: Video timing
on page 38.
Index Byte
Table 12. Analog gain description [0x0080 to 0x0093]
Register name
Data type Default Type
Comment
0x0080 Hi
analogue_gain_capability
0x0081 Lo
0x0084 Hi
analogue_gain_code_min
0x0085 Lo
0x0086 Hi
analogue_gain_code_max
0x0087 Lo
0x0088 Hi
analogue_gain_code_step
0x0089 Lo
16B
16UI
16UI
Analog gain capability
00.00 RO
0 – single global analog gain only
00.00
RO
Minimum recommended analog
gain code, that is, 0 (x1 gain)
00.F0
RO
Maximum recommended analog
gain code, that is, 240 (x16 gain)
16UI 00.10 RO Analog gain code step size
Doc ID028526 Rev 1
23/63
46