VS6663CC Datasheet, PDF (47/63 Pages) STMicroelectronics – 1.3 megapixel camera module

VS6663CC
7
Electrical characteristics
Electrical characteristics
All parameter values quoted in this outline product specification are design targets and will
be confirmed by evaluation of initial samples and device characterization.
Typical values quoted for nominal voltage, process and temperature. Maximum values are
quoted for worst case conditions (process, voltage and functional temperature) unless
otherwise specified.
7.1
Absolute maximum ratings
Table 26. Absolute maximum ratings
Symbol
Parameter
Minimum
Maximum
Unit
V_DIGMAX
V_ANAMAX
V_IP(DIG)
T_STO
V_ESD
Digital power supply
Analog power supply
Digital input voltage⁽¹⁾
Storage temperature
Electrostatic discharge model
Human body model⁽³⁾
Charge device model⁽⁴⁾
-0.3
-0.3
-0.3
-40
-2
-500
2.2
V
3.2
V
V_ANA + 0.3
V
+ 85⁽²⁾
o_C
2
KV
500
V
1. Digital input: EXTCLK, XSHUTDOWN, SCL, SDA
2. This is a maximum long term standard storage temperature, see soldering profile for short term high
temperature tolerance
3. HBM tests are performed in compliance with JESD22-A114F
MM test is performed in compliance with JESD22-A115A Class B if HBM pass level is less than 1000V.
4. CDM ESD tests are performed in compliance with JESD22-C101D
Caution:
Stresses above those listed under “Absolute Maximum Ratings” may cause permanent
damage to the device. This is a stress rating only and functional operation of the device at
these or any other conditions above those indicated in the operational sections of the
specification is not implied. Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
Doc ID028526 Rev 1
47/63
54