VS6663CC Datasheet, PDF (37/63 Pages) STMicroelectronics – 1.3 megapixel camera module

VS6663CC
Video data interface
Dummy pixel data
This is invalid pixel data. The receiver should always ignore dummy pixel data. The
VS6663CC has 0 dummy columns.
Visible pixel data
The visible pixels contain valid image data.The correct integration time and analog gain for
the visible pixels is specified in the blank lines at the start of the frame.The number of visible
pixels can be varied with the requested frame size.
Dark pixel data (light shielded pixels)
The VS6663CC has 0 dark pixels.
Black pixel data (zero integration time)
The VS6663CC has 0 black pixels.
Manufacturer specific pixel data
The VS6663CC has 0 manufacturer specific pixels.
Interline padding/line blanking
During interline padding all bits in the data stream in a CCP2 frame are set to 1.
In a CSI-2 frame there is no concept of line blanking being transmitted, the sensor will
simply spend a longer time in the LP state between active line data.
Interframe padding / frame blanking
During interframe padding all bits in the data stream in a CCP2 frame are set to 1.
In a CSI-2 frame there is no concept of frame blanking being transmitted, the sensor will
simply spend a longer time in the LP state at the end of the active data for a frame.
Doc ID028526 Rev 1
37/63
46