STE2004 Datasheet, PDF (53/66 Pages) STMicroelectronics – 102 X 65 SINGLE CHIP LCD CONTROLLER / DRIVER

Figure 69. Initialization with built-in Booster
SETUP NORMAL DISPLAY MODE CONFIGURATION
SET Driver in Power Down(PD=1)
SET Driver in Normal Display Mode (PE=0)
SET Operative Voltage for Normal Display Operation
( Vop[6:0] - PRS[1;0])
SET Bias Raio for Normal Display Operation
(BS[2:0])
SET Temperature Compensation for
Normal Display Operation (T[2:0] or TC[1:0])
SET Multiplexing Rate
M[1:0)
SET Charge Pump for
Normal Display Operation (CP[1:0])
Switch "ON" Booster and Display Control Logic
(PD=0)
END OF NORMAL DISPLAY MODE CONFIG.
LR0218
STE2004
53/66