LPS35HW Datasheet, PDF (18/48 Pages) STMicroelectronics – Embedded temperature compensation

FIFO
Figure 9: Dynamic-Stream mode
LPS35HW
4.5
Stream-to-FIFO mode
In Stream-to-FIFO mode (FIFO_CTRL(FMODE2:0) = 011), FIFO behavior changes
according to the INT_SOURCE(IA) bit. When INT_SOURCE(IA) bit is equal to '1', FIFO
operates in FIFO mode. When the INT_SOURCE(IA) bit is equal to '0', FIFO operates in
Stream mode.
An interrupt generator can be set to the desired configuration through
INTERRUPT_CFG(0Bh).
The INTERRUPT_CFG(LIR) bit should be set to '1' in order to have latched interrupt.
Figure 10: Stream-to-FIFO mode
18/48
DocID029129 Rev 1