EFR32FG12P432F Datasheet, PDF (53/183 Pages) Silicon Laboratories – EFR32FG12 Flex Gecko Proprietary Protocol SoC Family Data Sheet

EFR32FG12 Flex Gecko Proprietary Protocol SoC Family Data Sheet
Electrical Specifications
Parameter
Symbol
Test Condition
Min
Typ
Max
Unit
Max spurious emissions dur- SPUR_{RX_FCC}
ing active receive mode, per
FCC Part 15.109(a)
216-960 MHz
Above 960 MHz
—
-55
-49.2
dBm
—
-47
-41.2
dBm
Max spurious emissions dur- SPUR_{RX_ARIB} Below 710 MHz, RBW=100kHz
—
ing active receive mode,per
ARIB STD-T108 Section 3.3
710-900 MHz, RBW=1MHz
—
900-915 MHz, RBW=100kHz
—
-60
-54
dBm
-61
-55
dBm
-61
-55
dBm
915-930 MHz, RBW=100kHz
—
-61
-55
dBm
930-1000 MHz, RBW=100kHz
—
-60
-54
dBm
Above 1000 MHz, RBW=1MHz
—
-53
-47
dBm
Note:
1. Definition of reference signal is 100 kbps 2GFSK, BT=0.5, Δf = 50 kHz, RX channel BW = 198.024 kHz, channel spacing = 400
kHz.
2. Definition of reference signal is 400 kbps 4GFSK, BT=0.5, inner deviation = 33.3 kHz, RX channel BW = 368.920 kHz, channel
spacing = 600 kHz.
3. Definition of reference signal is 4.8 kbps OOK, RX channel BW = 306.036 kHz, channel spacing = 500 kHz.
4. Definition of reference signal is 500 kbps 2GFSK, BT=0.5, Δf = 175 kHz, RX channel BW = 835.076 kHz, channel spacing = 1
MHz.
5. Definition of reference signal is 50 kbps 2GFSK, BT=0.5, Δf = 25 kHz, RX channel BW = 99.012 kHz, channel spacing = 200 kHz.
6. Definition of reference signal is 600 bps 2GFSK, BT=0.5, Δf = 0.3 kHz, RX channel BW = 1.2 kHz, channel spacing = 300 kHz.
7. RFSENSE performance is only valid from 0 to 85 °C. RFSENSE should be disabled outside this temperature range.
silabs.com | Building a more connected world.
Rev. 1.0 | 48