M16C65C_15 Datasheet, PDF (87/112 Pages) Renesas Technology Corp – RENESAS MCU

M16C/65C Group
5. Electrical Characteristics
V_CC1 = V_CC2 = 3 V
Table 5.43 Electrical Characteristics (3) (1/2)
R5F3651ECNFC, R5F3651KCNFC, R5F3650KCNFA, R5F3650KCNFB, R5F3651MCNFC, R5F3650MCNFA,
R5F3650MCNFB, R5F3651NCNFC, R5F3650NCNFA, R5F3650NCNFB,
R5F3651ECDFC, R5F3651KCDFC, R5F3650KCDFA, R5F3650KCDFB, R5F3651MCDFC, R5F3650MCDFA,
R5F3650MCDFB, R5F3651NCDFC, R5F3650NCDFA, R5F3650NCDFB
V_CC1 = V_CC2 = 2.7 to 3.3 V, V_SS = 0 V at T_opr = −20°C to 85°C/−40°C to 85°C, f_(BCLK) = 32 MHz unless otherwise specified.
Symbol
Parameter
Measuring Condition
Standard
Unit
Min. Typ. Max.
R_fXCIN Feedback resistance
XCIN
16
MΩ
I_CC
Power supply current High-speed mode f_(BCLK) = 32 MHz
XIN = 4 MHz (square wave),
In single-chip, mode,
PLL multiplied by 8
the output pin are
125 kHz on-chip oscillator stopped
open and other pins
are V_SS
f_(BCLK) = 32 MHz, A/D conversion
XIN = 4 MHz (square wave),
PLL multiplied by 8
125 kHz on-chip oscillator stopped
f_(BCLK) = 20 MHz
XIN = 20 MHz (square wave)
125 kHz on-chip oscillator stopped
40 MHz on-chip Main clock stopped
oscillator mode 40 MHz on-chip oscillator on,
divide-by-4 (f(BCLK) = 10 MHz)
125 kHz on-chip oscillator stopped
125 kHz on-chip Main clock stopped
oscillator mode 40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator on, no division
FMR22 = 1 (slow read mode)
26.0
mA
27.0
mA
17.0
mA
18.0
mA
500.0
μA
Low-power mode
Wait mode
f_(BCLK) = 32 MHz
In low-power mode, FMR 22 = FMR23 = 1
on flash memory ⁽¹⁾
f_(BCLK) = 32 MHz
In low-power mode,
on RAM ⁽¹⁾
Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator on
Peripheral clock operating
T_opr = 25°C
f_(BCLK) = 32 MHz (oscillation capacity High)
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock operating
T_opr = 25°C
f_(BCLK) = 32 kHz (oscillation capacity Low)
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock operating
T_opr = 25°C
XIN = 6 MHz
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock f1 provision disabled except
timers (PCKSTP1A = 1)
Main clock as a timer clock source
(PCKSTP11 = 0, PCKSTP17 = 1)
A given timer operating
170.0
μA
40.0
μA
20.0
μA
8.0
μA
4.0
μA
0.5
mA
Note:
1. This indicates the memory in which the program to be executed exists.
R01DS0015EJ0110 Rev.1.10
Jul 31, 2012
Page 87 of 109