M16C65C_15 Datasheet, PDF (64/112 Pages) Renesas Technology Corp – RENESAS MCU

M16C/65C Group
5. Electrical Characteristics
V_CC1 = V_CC2 = 5 V
Table 5.20 Electrical Characteristics (3)
R5F36506CNFA, R5F36506CNFB, R5F3650ECNFA, R5F3650ECNFB, R5F36506CDFA, R5F36506CDFB,
R5F3650ECDFA, R5F3650ECDFB
V_CC1 = V_CC2 = 4.2 to 5.5 V, V_SS = 0 V at T_opr = −20°C to 85°C/−40°C to 85°C, f_(BCLK) = 32 MHz unless otherwise specified.
Symbol
Parameter
Measuring Condition
R_fXCIN Feedback resistance
XCIN
I_CC
Power supply current High-speed mode f_(BCLK) = 32 MHz
In single-chip, mode,
the output pin are
open and other pins
are V_SS
XIN = 4 MHz (square wave), PLL multiplied by 8
125 kHz on-chip oscillator stopped
f_(BCLK) =32 MHz, A/D conversion
XIN = 4 MHz (square wave), PLL multiplied by 8
125 kHz on-chip oscillator stopped
f_(BCLK) = 20 MHz
XIN = 20 MHz (square wave)
125 kHz on-chip oscillator stopped
40 MHz on-chip Main clock stopped
oscillator mode 40 MHz on-chip oscillator on,
divide-by-4 (f_(BCLK) = 10 MHz)
125 kHz on-chip oscillator stopped
125 kHz on-chip Main clock stopped
oscillator mode 40 MHz on-chip oscillator stopped,
125 kHz on-chip oscillator on, no division
FMR22 = 1 (slow read mode)
Low-power mode f_(BCLK) = 32 kHz
In low-power mode
FMR22 = FMR23 = 1
On flash memory ⁽¹⁾
f_(BCLK) = 32 kHz
In low-power mode
On RAM ⁽¹⁾
Wait mode
Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator on
Peripheral clock operating
T_opr = 25°C
f_(BCLK) = 32 kHz (oscillation capacity High)
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock operating
T_opr = 25°C
f_(BCLK) = 32 kHz (oscillation capacity Low)
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock operating
T_opr = 25°C
XIN = 6 MHz
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock f1 provision disabled except
timers (PCKSTP1A = 1)
Main clock as a timer clock source
(PCKSTP11 = 0, PCKSTP17 = 1)
A given timer operating
Stop mode
Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock stopped
During flash
memory program
T_opr = 25°C
f_(BCLK) = 10 MHz, PM17 = 1 (one wait)
V_CC1 = 5.0 V
During flash
memory erase
f_(BCLK) = 10 MHz, PM17 = 1 (one wait)
V_CC1 = 5.0 V
Note:
1. This indicates the memory in which the program to be executed exists.
Standard
Min. Typ. Max.
Unit
8
MΩ
24.0
mA
24.7
mA
16.0
mA
17.0
mA
500.0
μA
160.0
μA
45.0
μA
20.0
μA
11.0
μA
6.0
μA
1.2
mA
1.7
μA
20.0
mA
30.0
mA
R01DS0015EJ0110 Rev.1.10
Jul 31, 2012
Page 64 of 109