M16C65C_15 Datasheet, PDF (63/112 Pages) Renesas Technology Corp – RENESAS MCU

M16C/65C Group
5. Electrical Characteristics
V_CC1 = V_CC2 = 5 V
Table 5.19 Electrical Characteristics (2) ⁽¹⁾
V_CC1 = V_CC2 = 4.2 to 5.5 V, V_SS = 0 V at T_opr = −20°C to 85°C/−40°C to 85°C, f_(BCLK) = 32 MHz unless otherwise specified.
Symbol
Parameter
Measuring
Condition
V_T+ - V_T- Hysteresis
HOLD, RDY, TA0IN to TA4IN, TB0IN to TB5IN,
INT0 to INT7, NMI, ADTRG, CTS0 to CTS2,
CTS5 to CTS7, SCL0 to SCL2, SCL5 to SCL7,
SDA0 to SDA2, SDA5 to SDA7, CLK0 to CLK7,
TA0OUT to TA4OUT,
KI0 to KI3, RXD0 to RXD2, RXD5 to RXD7,
SIN3, SIN4, SD, PMC0, PMC1, SCLMM,
SDAMM, CEC, ZP, IDU, IDV, IDW
V_T+ - V_T- Hysteresis RESET
I_IH
High input P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, V_I = 5 V
current
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7,
P9_0 to P9_7, P10_0 to P10_7,
P11_0 to P11_7, P12_0 to P12_7,
P13_0 to P13_7, P14_0, P14_1
XIN, RESET, CNVSS, BYTE
I_IL
Low input P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, V_I = 0 V
current
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7,
P9_0 to P9_7, P10_0 to P10_7,
P11_0 to P11_7, P12_0 to P12_7,
P13_0 to P13_7, P14_0, P14_1
XIN, RESET, CNVSS, BYTE
R_PULLUP Pull-up
resistance
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4,
P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7,
P11_0 to P11_7, P12_0 to P12_7,
P13_0 to P13_7, P14_0, P14_1
V_I = 0 V
R_fXIN Feedback resistance XIN
V_RAM RAM retention voltage
In stop mode
Standard
Unit
Min. Typ. Max.
0.5
2.0 V
0.5
2.5 V
5.0 μA
−5.0 μA
30
50 100 kΩ
1.5
MΩ
1.8
V
Note:
1. When V_CC1 ≠ V_CC2, refer to 5 V or 3 V standard depending on the voltage.
R01DS0015EJ0110 Rev.1.10
Jul 31, 2012
Page 63 of 109