M16C65C_15 Datasheet, PDF (65/112 Pages) Renesas Technology Corp – RENESAS MCU

M16C/65C Group
5. Electrical Characteristics
V_CC1 = V_CC2 = 5 V
Table 5.21 Electrical Characteristics (4)
R5F3651ECNFC, R5F3651KCNFC, R5F3650KCNFA, R5F3650KCNFB, R5F3651MCNFC, R5F3650MCNFA, R5F3650MCNFB,
R5F3651NCNFC, R5F3650NCNFA, R5F3650NCNFB, R5F3651ECDFC, R5F3651KCDFC, R5F3650KCDFA, R5F3650KCDFB,
R5F3651MCDFC, R5F3650MCDFA, R5F3650MCDFB, R5F3651NCDFC, R5F3650NCDFA, R5F3650NCDFB
V_CC1 = V_CC2 = 4.2 to 5.5 V, V_SS = 0 V at T_opr = −20°C to 85°C/−40°C to 85°C, f_(BCLK) = 32 MHz unless otherwise specified.
Symbol
Parameter
R_fXCIN
I_CC
Feedback resistance
XCIN
Power supply current High-speed mode
In single-chip, mode,
the output pin are
open and other pins
are V_SS
Measuring Condition
f_(BCLK) = 32 MHz
XIN = 4 MHz (square wave), PLL multiplied by 8
125 kHz on-chip oscillator stopped
f_(BCLK) = 32 MHz, A/D conversion
XIN = 4 MHz (square wave), PLL multiplied by 8
125 kHz on-chip oscillator stopped
f_(BCLK) = 20 MHz
XIN = 20 MHz (square wave)
Standard
Min. Typ. Max.
Unit
8
MΩ
26.0
mA
27.0
mA
17.0
mA
40 MHz on-chip
125 kHz on-chip oscillator stopped
Main clock stopped
oscillator mode
40 MHz on-chip oscillator on,
divide-by-4 (f(BCLK) = 10 MHz)
18.0
mA
125 kHz on-chip
125 kHz on-chip oscillator stopped
Main clock stopped
oscillator mode
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator on, no division
550.0
μA
Low-power mode
FMR22 = 1 (slow read mode)
f_(BCLK) = 32 kHz
In low-power mode
FMR22 = FMR23 = 1
170.0
μA
on flash memory ⁽¹⁾
f_(BCLK) = 32 kHz
In low-power mode
45.0
μA
Wait mode
on RAM ⁽¹⁾
Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator on
Peripheral clock operating
T_opr = 25°C
f_(BCLK) = 32 kHz (oscillation capacity High)
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
20.5
μA
11.0
μA
Peripheral clock operating
T_opr = 25°C
f_(BCLK) = 32 kHz (oscillation capacity low)
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
6.0
μA
Peripheral clock operating
T_opr = 25°C
XIN = 6 MHz
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock f1 provision disabled except
timers (PCKSTP1A = 1)
1.2
mA
Main clock as a timer clock source
(PCKSTP11 = 0, PCKSTP17 = 1)
Stop mode
A given timer operating
Main clock stopped
40 MHz on-chip oscillator stopped
125 kHz on-chip oscillator stopped
Peripheral clock stopped
1.7
μA
Note:
1.
T_opr = 25°C
During flash memory f_(BCLK) = 10 MHz, PM17 = 1 (one wait)
program
V_CC1 = 5.0 V
During flash memory f_(BCLK) = 10 MHz, PM17 = 1 (one wait)
erase
V_CC1 = 5.0 V
This indicates the memory in which the program to be executed exists.
20.0
mA
30.0
mA
R01DS0015EJ0110 Rev.1.10
Jul 31, 2012
Page 65 of 109