English
Language : 

M16C6NL Datasheet, PDF (18/388 Pages) Renesas Technology Corp – 16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY / M16C/60 SERIES
Under development
This document is under development and its contents are subject to change.
M16C/6N Group (M16C/6NL, M16C/6NN)
1. Overview
1.2 Performance Outline
Tables 1.1 and 1.2 list a performance outline of M16C/6N Group (M16C/6NL, M16C/6NN).
Table 1.1 Performance Outline of M16C/6N Group (100-pin Version: M16C/6NL)
Item
Performance
CPU
Number of Basic Instructions 91 instructions
Minimum Instruction Execution Time 41.7ns (f(BCLK) = 24MHz, 1/1 prescaler, without software wait)
Operation Mode
Single-chip, memory expansion and microprocessor modes
Address Space
1 Mbyte
Memory Capacity
See Table 1.3 Product List
Peripheral Port
Input/Output: 87 pins, Input: 1 pin
Function Multifunction Timer
Timer A: 16 bits ✕ 5 channels
Timer B: 16 bits ✕ 6 channels
Three-phase motor control circuit
Serial Interface
3 channels
Clock synchronous, UART, I2C-bus (1), IEBus (2)
2 channels
Clock synchronous
A/D Converter
D/A Converter
10-bit A/D converter: 1 circuit, 26 channels
8 bits ✕ 2 channels
DMAC
2 channels
CRC Calculation Circuit CRC-CCITT
CAN Module
1 channel with 2.0B specification
Watchdog Timer
15 bits ✕ 1 channel (with prescaler)
Interrupt
Internal: 30 sources, External: 9 sources
Software: 4 sources, Priority level: 7 levels
Clock Generating Circuit 4 circuits
• Main clock oscillation circuit (*)
• Sub clock oscillation circuit (*)
• On-chip oscillator
• PLL frequency synthesizer
(*) Equipped with a built-in feedback resistor
Oscillation Stop Detection Main clock oscillation stop and re-oscillation detection function
Function
Electrical Supply Voltage
VCC = 3.0 to 5.5V
Characteristics
(f(BCLK) = 24MHz, 1/1 prescaler, without software wait)
Power
Mask ROM 19mA (f(BCLK) = 24MHz, PLL operation, no division)
Consumption Flash Memory 21mA (f(BCLK) = 24MHz, PLL operation, no division)
Mask ROM 3µA (f(BCLK) = 32kHz, Wait mode, Oscillation capacity Low)
Flash Memory 0.8µA (Stop mode, Topr = 25°C)
Flash Memory Program/Erase Supply Voltage 3.3 ± 0.3V or 5.0 ± 0.5V
Version
Program and Erase Endurance 100 times
I/O
I/O Withstand Voltage
5.0V
Characteristics Output Current
5mA
Operating Ambient Temperature
-40 to 85°C
Device Configuration
CMOS high performance silicon gate
Package
100-pin plastic mold LQFP
NOTES:
1. I2C-bus is a registered trademark of Koninklijke Philips Electronics N.V.
2. IEBus is a registered trademark of NEC Electronics Corporation.
Rev.2.00 Nov 28, 2005 page 2 of 364
REJ09B0126-02002