M16C5L_15 Datasheet, PDF (113/116 Pages) Renesas Technology Corp – RENESAS MCU

REVISION HISTORY
M16C/5L Group, M16C/56 Group Datasheet
Rev.
1.00
1.10
Date
Feb.08, 2010
Aug. 05, 2011
Page
—
Overview
First edition issued
Description
Summary
3, 5 ^{Table 1.2, Table 1.4 Specifications (2/2) (80-pin, 64-pin):}
Added the Current Consumption row.
6
Table 1.5 Product List of M16C/5L Group and Table 1.6 Product List of M16C/56 Group:
Changed the product statuses.
Figure 1.3, Figure 1.4 Block Diagram (100-pin, 80-pin, 64-pin):
• Deleted “8-bit” from the description for the UART/clock synchronous serial interface.
• Deleted “(8-bit x 1 channel)” from the description for the Real-time clock.
• Added “(1 channel)” to the description for the Multi-master I²C-bus.
8, 9
• Added the note symbol “(1)” to the CAN module and E2dataFlash.
• Moved “dedicated 125 kHz on-chip oscillator for the watchdog timer” to description for
the watchdog timer.
• Added “(8-bit x 1 circuit)” to the description for the D/A converter.
• Unified note 1 and note 2, and added description for the CAN module and E2dataFlash
to note 1.
10, 13 ^{Figure 1.5, Figure 1.6 Pin Assignments (80-pin, 64-pin):}
Added TSUDA and TSUDB to pins P8_0 and P8_1, respectively.
11, 14 ^{Table 1.7, Table 1.9 Pin Names (1/2) (80-pin, 64-pin):}
Added TSUDA and TSUDB to pins P8_0 and P8_1, respectively.
Table 1.11 Pin Functions (64-Pin and 80-Pin Packages) (1/2):
• Deleted “pin” or “pins” from “input pin/pins” and “output pin/pins”.
• Changed “low active input” to “input”.
• Added “Pins” to “AVCC and AVSS” in the Description column of the Analog power
supply row.
• Deleted “Low active input pin.” from the Reset input row.
16
• Changed the description in the Description column of the CNVSS row.
• Added footnote reference number (1) in the Sub clock input and output rows in the
Description column.
• Deleted “INT2 is used to input Z-phase of timer A” in the Description column of the INT
interrupt input row.
• Added UART0 to UART3 in the Signal Name column of the Serial interface row.
• Added UART2 to the Signal Name column of the I²C mode row.
Table 1.12 Pin Functions (64-Pin and 80-Pin Packages) (2/2):
• Changed “low active input” to “input”.
• Added “TSUDA, TSUDB” to the Pin Name in the Timer S row.
17
• Changed “Input pin” to “Receive data input” and “Output pin” to “Transmit data output”
in the Description column of the CAN Module row.
• In the Description column of the I/O port row, changed the explanation of the direction
register, and changed “4 input ports” to “4 bits”.
18
Memory
Table 1.13 Pin Functions (80-Pin Package Only):
• Added UART4 to the Signal Name column of the Serial interface row.
• In the Description column of the I/O port row, changed the explanation of the direction
register, and changed “4 input ports” to “4 bits”.
Figure 3.1 Memory Map:
• Deleted “E²dataFlash” and “15000h”
23
• Added “ID code write address”, “OFS1 address”, and “OFS2 address”.
• Added note 2.
• Added footnote reference numbers (1) and (2).
Special Function Registers (SFRs)
55
4.2.1 Register Settings: Added the description regarding read-modify-write instructions.
56
Table 4.33 Read-Modify-Write Instructions: Added.
A- 1