CP5.241 Datasheet, PDF (2/26 Pages) PULS GmbH – 24V, 5A, 120W, SINGLE PHASE INPUT

PRELIMINARY
CP-Series
CP5.241, CP5.241-C1,
CP5.241-S1, CP5.241-S2
24V, 5A, 120W, SINGLE PHASE INPUT
INDEX
Page
1. Intended Use .......................................................3
2. Installation Requirements...................................3
3. AC-Input...............................................................4
4. DC-Input...............................................................5
5. Input Inrush Current ...........................................5
6. Output .................................................................6
7. Hold-up Time.......................................................8
8. DC-OK Relay Contact ..........................................8
9. Efficiency and Power Losses................................9
10. Lifetime Expectancy ..........................................10
11. MTBF ..................................................................10
12. Functional Diagram...........................................11
13. Terminals and Wiring........................................11
14. Front Side and User Elements...........................13
15. EMC....................................................................14
16. Environment ......................................................15
17. Protection Features ...........................................16
18. Safety Features ..................................................16
19. Dielectric Strength ............................................17
20. Approvals...........................................................18
21. RoHS, REACH and Other Fulfilled Standards ...18
Page
22. Physical Dimensions and Weight ..................... 19
23. Accessories ........................................................ 20
23.1. YR2.DIODE - Redundancy Module...........20
23.2. YR20.242 - Redundancy Module..............20
23.3. YR20.246 - Redundancy Module with
Automated Load Sharing ....................................20
23.4. UF20.241 Buffer Module ..........................21
23.5. ZM6.WALL – Wall/Panel Mount Bracket .21
24. Application Notes............................................. 22
24.1. Peak Current Capability ...........................22
24.2. Back-feeding Loads ..................................22
24.3. External Input Protection.........................22
24.4. Parallel Use to Increase Output Power....22
24.5. Parallel Use for Redundancy ....................23
24.6. Series Operation .......................................24
24.7. Inductive and Capacitive Loads................24
24.8. Charging of Batteries ...............................24
24.9. Operation on Two Phases ........................25
24.10. Use in a Tightly Sealed Enclosure ............25
24.11. Mounting Orientations ............................26
The information given in this document is correct to the best of our knowledge and experience at the time of
publication. If not expressly agreed otherwise, this information does not represent a warranty in the legal sense of the
word. As the state of our knowledge and experience is constantly changing, the information in this data sheet is
subject to revision. We therefore kindly ask you to always use the latest issue of this document (available under
www.pulspower.com). No part of this document may be reproduced or utilized in any form without our prior
permission in writing.
TERMINOLOGY AND ABREVIATIONS
PE and symbol
Earth, Ground
T.b.d.
AC 230V
230Vac
50Hz vs. 60Hz
may
shall
should
PE is the abbreviation for Protective Earth and has the same meaning as the symbol .
This document uses the term “earth” which is the same as the U.S. term “ground”.
To be defined, value or description will follow later.
A figure displayed with the AC or DC before the value represents a nominal voltage with
standard tolerances (usually ±15%) included.
E.g.: DC 12V describes a 12V battery disregarding whether it is full (13.7V) or flat (10V)
A figure with the unit (Vac) at the end is a momentary figure without any additional
tolerances included.
As long as not otherwise stated, AC 230V parameters are valid at 50Hz mains frequency.
A key word indicating flexibility of choice with no implied preference.
A key word indicating a mandatory requirement.
A key word indicating flexibility of choice with a strongly preferred implementation.
Aug. 2017 / Rev. 0.1 DS-CP5.241-EN
All parameters are typical values specified at 24V, 5A output, 230Vac input, 25°C ambient and
after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
2/26