TDA4841PS Datasheet, PDF (16/60 Pages) NXP Semiconductors – I2C-bus autosync deflection controller for PC monitors

Philips Semiconductors
I²C-bus autosync deflection controller for
PC monitors
Product specification
TDA4841PS
SYMBOL
PARAMETER
CONDITIONS
Automatic polarity correction for vertical sync
t_VSYNC(max)
maximum width of vertical sync
pulse
t_d(VPOL)
delay time for changing polarity
Video clamping/vertical blanking output: pin CLBL
t_clamp(CLBL)
V_clamp(CLBL)
TC_clamp
STPS_clamp
t_{d(HSYNCt-CLBL)}
t_clamp(max)
t_{d(HSYNCl-CLBL)}
t_clamp(max)
V_blank(CLBL)
t_blank(CLBL)
TC_blank
V_scan(CLBL)
TC_scan
I_sink(CLBL)
I_L(CLBL)
width of video clamping pulse
top voltage level of video
clamping pulse
temperature coefficient of
V_clamp(CLBL)
steepness of slopes for
clamping pulse
delay between trailing edge of
horizontal sync and start of
video clamping pulse
maximum duration of video
clamping pulse referenced to
end of horizontal sync
delay between leading edge of
horizontal sync and start of
video clamping pulse
maximum duration of video
clamping pulse referenced to
end of horizontal sync
top voltage level of vertical
blanking pulse
width of vertical blanking pulse
at pins CLBL and HUNLOCK
temperature coefficient of
V_blank(CLBL)
output voltage during vertical
scan
temperature coefficient of
V_scan(CLBL)
internal sink current
external load current
measured at V_CLBL = 3 V
R_L = 1 MΩ; C_L = 20 pF
clamping pulse triggered
on trailing edge of
horizontal sync;
control bit CLAMP = 0;
measured at V_CLBL = 3 V
clamping pulse triggered
on leading edge of
horizontal sync;
control bit CLAMP = 1;
measured at V_CLBL = 3 V
notes 1 and 2
control bit VBLK = 0
control bit VBLK = 1
I_CLBL = 0
MIN. TYP. MAX. UNIT
−
−
0.45 −
400 µs
1.8
ms
0.6
0.7
0.8
µs
4.32 4.75 5.23 V
−
4
−
mV/K
−
50
−
ns/V
−
130 −
ns
−
−
1.0
µs
−
300 −
ns
−
−
0.15 µs
1.7
1.9
2.1
V
220 260 300 µs
305 350 395 µs
−
2
−
mV/K
0.59 0.63 0.67 V
−
−2
−
mV/K
2.4
−
−
−
−
mA
−3.0 mA
1999 Oct 25
16