ADP3210 Datasheet, PDF (8/38 Pages) ON Semiconductor – 7-Bit Programmable Multiphase Mobile CPU Synchronous

ADP3210
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter
VCC
FBRTN
SW1 to SW3
DC
t < 200 ns
RAMPADJ (In Shutdown)
All Other Inputs and Outputs
Storage Temperature
Operating Ambient Temperature Range
Operating Junction Temperature
Thermal Impedance (θJA)
Lead Temperature
Soldering (10 sec)
Infrared (15 sec)
Rating
–0.3 V to +6 V
–0.3 V to +0.3 V
−1 V to +22 V
−6 V to +28 V
−0.3 V to +22 V
–0.3 V to VCC + 0.3 V
–65°C to +150°C
–10°C to 100°C
125°C
98°C/W
300°C
260°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Absolute maximum ratings apply individually only, not in
combination. Unless otherwise specified, all other voltages are
referenced to GND.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the
human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. 0.3 | Page 8 of 38