AR0134CS_16 Datasheet, PDF (23/38 Pages) ON Semiconductor – 1/3-Inch 1.2 Mp CMOS Digital Image Sensor

AR0134CS: 1/3-Inch 1.2 Mp CMOS Digital Image Sensor
Electrical Specifications
Notes:
1. Minimum and maximum values are taken at 70°C, 1.7V and -30°C, 1.95V. All values are taken at the
50% transition point. The loading used is 10 pF.
2. Jitter from PIXCLK is already taken into account in the data for all of the output parameters.
Table 7:
I/O Timing Characteristics, Parallel Output (2.8V VDD_IO)¹
Symbol Definition
Condition
Min Typ Max Unit
f_EXTCLK Input clock frequency
6
50
MHz
t_EXTCLK Input clock period
20
166
ns
t_R
Input clock rise time
PLL enabled
3
ns
t_F
Input clock fall time
PLL enabled
3
ns
t_jJITTER Input clock jitter
600
ns
t_cp
EXTCLK to PIXCLK
propagation delay
Nominal voltages, PLL
5.3
disabled, PIXCLK slew
rate = 4
13.4
ns
t_RP PIXCLK rise time
t_FP PIXCLK fall time
PIXCLK duty cycle
PCLK slew rate = 6
PCLK slew rate = 6
1.3
4.0
ns
1.3
3.9
ns
40
50
60
%
f_{PIXCLK PIXCLK frequency}
PIXCLK slew rate = 6,
Data slew rate = 7
6
74.25 MHz
t_PD
PIXCLK to data valid
PIXCLK slew rate = 6,
Data slew rate = 7
-2.5
2
ns
t_{PFH PIXCLK to FV HIGH}
PIXCLK slew rate = 6,
-2.5
Data slew rate = 7
2
ns
t_{PLH PIXCLK to LV HIGH}
PIXCLK slew rate = 6,
-2.5
Data slew rate = 7
2
ns
t_PFL
PIXCLK to FV LOW
PIXCLK slew rate = 6,
-2.5
Data slew rate = 7
2
ns
t_PLL
PIXCLK to LV LOW
PIXCLK slew rate = 6,
-2.5
Data slew rate = 7
2
ns
CIN Input pin capacitance
2.5
pf
Notes:
1. Minimum and maximum values are taken at 70°C, 1.7V and -30°C, 1.95V. All values are taken at the
50% transition point. The loading used is 10 pF.
2. Jitter from PIXCLK is already taken into account in the data for all of the output parameters.
AR0134CS/D Rev. 8, Pub. 1/16 EN
23
©Semiconductor Components Industries, LLC,2016.