|
TDA8296 Datasheet, PDF (61/87 Pages) NXP Semiconductors – Digital global standard low IF demodulator for analog TV and FM radio | |||
|
◁ |
NXP Semiconductors
TDA8296
Digital global standard low IF demodulator for analog TV and FM radio
Table 64. Characteristics â¦continued
Power supplies 3.3 V, 1.2 V; Tamb = 25 °C; PC/SC1 for L and M = 10 dB, all others 13 dB; nominal residual picture carrier of
3 % for L/Lâ , 10 % for M, 10 % for B/G, 12.5 % for D/K, 20 % for I; FM/AM modulation = 54 %, 1 kHz modulation frequency;
measured in application PCB (see Figure 22 and Figure 23) with 16 MHz crystal frequency, terminated with 75 Ω (CVBS) and
1 kΩ (SSIF/audio). Operation mode set via easy programming (Section 9.3.1), otherwise stated. Low IF input signal at -3dB
full scale, input frequencies as defined under row header IF input.
Symbol
Parameter
Conditions
Min
Typ
Max Unit
(S/N)w(AF)
AF weighted
signal-to-noise ratio
via internal mono sound
demodulator;
âITU-R BS.468-4â; FM mode
related to 27 kHz deviation
before pre-emphasis; 10 %
residual PC; SC1
black picture
52
54
-
dB
flat field white picture
52
54
-
dB
6 kHz sine wave picture
52
54
-
dB
250 kHz square wave
52
picture
54
-
dB
crosshatch picture
52
54
-
dB
color bar picture
52
54
-
dB
via internal mono sound
[11]
demodulator; (audio
gain +6 dB) âITU-R BS.468-4â;
AM; m = 54 %; 3 % residual
PC; SC1
black picture
40
44
-
dB
flat field white picture
41
44
-
dB
color bar picture
40
44
-
dB
via internal mono sound
-
demodulator;
âITU-R BS.468-4â;
FM Radio mode;
22.5 kHz deviation
45
-
dB
TDA8296
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 â 3 March 2011
© NXP B.V. 2011. All rights reserved.
61 of 87
|
▷ |