PIC16F7X Datasheet, PDF (34/174 Pages) Microchip Technology – 28/40-Pin 8-Bit CMOS FLASH Microcontrollers

PIC16F7X
TABLE 4-1: PORTA FUNCTIONS
Name
Bit# Buffer
Function
RA0/AN0
bit0 TTL Input/output or analog input.
RA1/AN1
bit1 TTL Input/output or analog input.
RA2/AN2
bit2 TTL Input/output or analog input.
RA3/AN3/VREF
bit3
TTL Input/output or analog input or VREF.
RA4/T0CKI
bit4
ST Input/output or external clock input for Timer0. Output is open drain type.
RA5/SS/AN4
bit5 TTL Input/output or slave select input for synchronous serial port or analog input.
Legend: TTL = TTL input, ST = Schmitt Trigger input
TABLE 4-2: SUMMARY OF REGISTERS ASSOCIATED WITH PORTA
Address Name Bit 7 Bit 6 Bit 5 Bit 4 Bit 3
Bit 2
Bit 1
Bit 0
Value on: Value on all
POR,
other
BOR
RESETS
05h
PORTA
—
— RA5 RA4 RA3
RA2
RA1 RA0 --0x 0000 --0u 0000
85h
TRISA
— — PORTA Data Direction Register
--11 1111 --11 1111
9Fh
ADCON1 — — —
—
— PCFG2 PCFG1 PCFG0 ---- -000 ---- -000
Legend: x = unknown, u = unchanged, - = unimplemented locations read as '0'. Shaded cells are not used by PORTA.
Note: When using the SSP module in SPI Slave mode and SS enabled, the A/D converter must be set to one of
the following modes where PCFG2:PCFG0 = 100, 101, 11x.
DS30325B-page 32
 2002 Microchip Technology Inc.