PIC16F7X Datasheet, PDF (112/174 Pages) Microchip Technology – 28/40-Pin 8-Bit CMOS FLASH Microcontrollers

PIC16F7X
MOVF
Syntax:
Operands:
Operation:
Status Affected:
Description:
Move f
[ label ] MOVF f,d
0 ≤ f ≤ 127
d ∈ [0,1]
(f) → (destination)
Z
The contents of register f are
moved to a destination dependant
upon the status of d. If d = 0,
destination is W register. If d = 1,
the destination is file register f itself.
d = 1 is useful to test a file register,
since status flag Z is affected.
MOVLW
Syntax:
Operands:
Operation:
Status Affected:
Description:
Move Literal to W
[ label ] MOVLW k
0 ≤ k ≤ 255
k → (W)
None
The eight-bit literal ’k’ is loaded
into W register. The don’t cares
will assemble as 0’s.
MOVWF
Syntax:
Operands:
Operation:
Status Affected:
Description:
Move W to f
[ label ] MOVWF f
0 ≤ f ≤ 127
(W) → (f)
None
Move data from W register to
register 'f'.
NOP
Syntax:
Operands:
Operation:
Status Affected:
Description:
No Operation
[ label ] NOP
None
No operation
None
No operation.
RETFIE
Syntax:
Operands:
Operation:
Status Affected:
Return from Interrupt
[ label ] RETFIE
None
TOS → PC,
1 → GIE
None
RETLW
Syntax:
Operands:
Operation:
Status Affected:
Description:
Return with Literal in W
[ label ] RETLW k
0 ≤ k ≤ 255
k → (W);
TOS → PC
None
The W register is loaded with the
eight-bit literal 'k'. The program
counter is loaded from the top of
the stack (the return address).
This is a two-cycle instruction.
DS30325B-page 110
 2002 Microchip Technology Inc.