PIC16F7X Datasheet, PDF (173/174 Pages) Microchip Technology – 28/40-Pin 8-Bit CMOS FLASH Microcontrollers

PIC16F7X
PIC16F7X PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office.
PART NO.
X
/XX
Device
Temperature Package
Range
XXX
Pattern
Device
PIC16F7X⁽¹⁾, PIC16F7XT⁽¹⁾; VDD range 4.0V to 5.5V
PIC16LF7X⁽¹⁾, PIC16LF7XT⁽¹⁾; VDD range 2.0V to 5.5V
Examples:
a) PIC16F77-I/P 301 = Industrial temp., PDIP
package, normal VDD limits, QTP pattern #301.
b) PIC16LF76-I/SO = Industrial temp., SOIC
package, Extended VDD limits.
c) PIC16F74-E/P = Extended temp., PDIP
package, normal VDD limits.
Temperature Range I
E
= -40°C to +85°C (Industrial)
= -40°C to +125°C (Extended)
Package
ML = MLF (Micro Lead Frame)
PT = TQFP (Thin Quad Flatpack)
SO = SOIC
SP = Skinny Plastic DIP
P
= PDIP
L
= PLCC
SS = SSOP
Note 1: F = CMOS FLASH
LF = Low Power CMOS FLASH
2: T = in tape and reel - SOIC, PLCC,
SSOP, TQFP packages only.
Pattern
QTP, SQTP, Code or Special Requirements
(blank otherwise)
Sales and Support
Data Sheets
Products supported by a preliminary Data Sheet may have an errata sheet describing minor operational differences and recom-
mended workarounds. To determine if an errata sheet exists for a particular device, please contact one of the following:
1. Your local Microchip sales office
2. The Microchip Corporate Literature Center U.S. FAX: [phone]
3. The Microchip Worldwide Site (www.microchip.com)
Please specify which device, revision of silicon and Data Sheet (include Literature #) you are using.
New Customer Notification System
Register on our web site (www.microchip.com/cn) to receive the most current information on our products.
 2002 Microchip Technology Inc.
DS30325B-page 171