DSPIC33FJ32GS406_12 Datasheet, PDF (332/456 Pages) Microchip Technology – 16-Bit Digital Signal Controllers with High-Speed PWM, ADC and Comparators

dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
REGISTER 22-10: ADCPC4: ADC CONVERT PAIR CONTROL REGISTER 4
R/W-0
IRQEN9
bit 15
R/W-0
PEND9
R/W-0
SWTRG9
R/W-0
R/W-0
R/W-0
R/W-0
TRGSRC9<4:0>
R/W-0
bit 8
R/W-0
IRQEN8
bit 7
R/W-0
PEND8
R/W-0
SWTRG8
R/W-0
R/W-0
R/W-0
R/W-0
TRGSRC8<4:0>
R/W-0
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
bit 14
bit 13
IRQEN9: Interrupt Request Enable 9 bit
1 = Enable IRQ generation when requested conversion of channels AN19 and AN18 is completed
0 = IRQ is not generated
PEND9: Pending Conversion Status 9 bit
1 = Conversion of channels AN19 and AN18 is pending; set when selected trigger is asserted
0 = Conversion is complete
SWTRG9: Software Trigger 9 bit
1 = Start conversion of AN19 and AN18 (if selected in TRGSRC bits)⁽¹⁾
This bit is automatically cleared by hardware when the PEND9 bit is set.
0 = Conversion is not started
Note 1: The trigger source must be set as a global software trigger prior to setting this bit to ‘1’. If other
conversions are in progress, the conversion is performed when the conversion resources are available.
DS70591E-page 332
 2009-2012 Microchip Technology Inc.