|
DSPIC33FJ32GS406_12 Datasheet, PDF (1/456 Pages) Microchip Technology – 16-Bit Digital Signal Controllers with High-Speed PWM, ADC and Comparators | |||
|
dsPIC33FJ32GS406/606/608/610 and
dsPIC33FJ64GS406/606/608/610
16-Bit Digital Signal Controllers with High-Speed PWM,
ADC and Comparators
Operating Conditions
⢠3.0V to 3.6V, -40ºC to +85ºC, DC to 50 MIPS
⢠3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
Core: 16-Bit dsPIC33F
⢠Code-Efficient (C and Assembly) Architecture
⢠Two 40-Bit Wide Accumulators
⢠Single-Cycle (MAC/MPY) with Dual Data Fetch
⢠Single-Cycle Mixed-Sign MUL plus Hardware Divide
⢠32-Bit Multiply Support
Clock Management
⢠±1% Internal Oscillator
⢠Programmable PLLs and Oscillator Clock Sources
⢠Fail-Safe Clock Monitor (FSCM)
⢠Independent Watchdog Timer (WDT)
⢠Fast Wake-up and Start-up
Power Management
⢠Low-Power Management modes (Sleep, Idle, Doze)
⢠Integrated Power-on Reset and Brown-out Reset
⢠1.7 mA/MHz Dynamic Current (typical)
⢠50 µA IPD Current (typical)
High-Speed PWM
⢠Up to 9 PWM Pairs with Independent Timing
⢠Dead Time for Rising and Falling Edges
⢠1.04 ns PWM Resolution
⢠PWM Support for:
- DC/DC, AC/DC, Inverters, PFC, Lighting
- BLDC, PMSM, ACIM, SRM
⢠Programmable Fault Inputs
⢠Flexible Trigger Configurations for ADC Conversions
Advanced Analog Features
⢠High-Speed ADC module:
- 10-bit resolution with up to two Successive
Approximation Register (SAR) converters (up to
4 Msps)
- Up to 24 input channels grouped into 12
conversion pairs plus two voltage reference
monitoring inputs
- Dedicated result buffer for each analog channel
⢠Flexible and Independent ADC Trigger Sources
⢠Up to 4 High-Speed Comparators with Direct
Connection to the PWM module:
- 10-bit Digital-to-Analog Converter (DAC) for each
comparator
- DAC reference output
- Programmable references with 1024 voltage points
Timers/Output Compare/Input Capture
⢠Six General Purpose Timers:
- Five 16-bit and up to two 32-bit timers/counters
⢠Four Output Compare (OC) modules Configurable as
Timers/Counters
⢠Quadrature Encoder Interface (QEI) module
Configurable as Timer/Counter
⢠Four Input Capture (IC) modules
Communication Interfaces
⢠Two UART modules (12.5 Mbps):
- With support for LIN/J2602 2.0 protocols and IrDA®
⢠Two 4-wire SPI modules (15 Mbps)
⢠ECAN⢠module (1 Mbaud) CAN 2.0B Support
⢠Two I2C⢠modules (up to 1 Mbaud) with SMBus
Support
Direct Memory Access (DMA)
⢠4-Channel DMA with User-Selectable Priority
Arbitration
⢠UART, SPI, ECANâ¢, IC, OC and Timers
Input/Output
⢠Sink/Source 18 mA on 18 Pins, 10 mA on 1 Pin or
6 mA on 66 Pins
⢠5V Tolerant Pins
⢠Selectable Open-Drain and Pull-ups
⢠29 External Interrupts
Qualification and Class B Support
⢠AEC-Q100 REVG (Grade 1 -40ºC to +125ºC)
⢠Class B Safety Library, IEC 60730, VDE Certified
Debugger Development Support
⢠In-Circuit and In-Application Programming
⢠Two Program and two Complex Data Breakpoints
⢠IEEE 1149.2 Compatible (JTAG) Boundary Scan
⢠Trace and Run-Time Watch
ï£ 2009-2012 Microchip Technology Inc.
DS70591E-page 1
|
▷ |