DSPIC33FJ32GS406_12 Datasheet, PDF (329/456 Pages) Microchip Technology – 16-Bit Digital Signal Controllers with High-Speed PWM, ADC and Comparators

dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
REGISTER 22-9: ADCPC3: ADC CONVERT PAIR CONTROL REGISTER 3
R/W-0
IRQEN7
bit 15
R/W-0
PEND7
R/W-0
SWTRG7
R/W-0
R/W-0
R/W-0
R/W-0
TRGSRC7<4:0>
R/W-0
bit 8
R/W-0
IRQEN6
bit 7
R/W-0
PEND6
R/W-0
SWTRG6
R/W-0
R/W-0
R/W-0
R/W-0
TRGSRC6<4:0>
R/W-0
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
bit 14
bit 13
IRQEN7: Interrupt Request Enable 7 bit
1 = Enables IRQ generation when requested conversion of Channels AN15 and AN14 is completed
0 = IRQ is not generated
PEND7: Pending Conversion Status 7 bit
1 = Conversion of Channels AN15 and AN14 is pending; set when selected trigger is asserted
0 = Conversion is complete
SWTRG7: Software Trigger 7 bit
1 = Starts conversion of AN15 and AN14 (if selected in TRGSRC bits)⁽¹⁾
This bit is automatically cleared by hardware when the PEND7 bit is set.
0 = Conversion has not started
Note 1: The trigger source must be set as a global software trigger prior to setting this bit to ‘1’. If other
conversions are in progress, the conversion is performed when the conversion resources are available.
 2009-2012 Microchip Technology Inc.
DS70591E-page 329