PIC32MX3XX_1 Datasheet, PDF (170/208 Pages) Microchip Technology – High-Performance, General Purpose and USB 32-bit Flash Microcontrollers

PIC32MX3XX/4XX
FIGURE 29-8:
OUTPUT COMPARE MODULE (OCx) TIMING CHARACTERISTICS
OCx
(Output Compare
or PWM Mode)
OC11
Note: Refer to Figure 29-1 for load conditions.
OC10
TABLE 29-26: OUTPUT COMPARE MODULE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
Param.
No.
Symbol
Characteristics⁽¹⁾
Min. Typical⁽²⁾ Max. Units
Conditions
OC10 TCCF OCx Output Fall Time
—
—
—
nsec See parameter DO32.
OC11 TCCR OCx Output Rise Time
—
—
—
nsec See parameter DO31.
Note 1: These parameters are characterized, but not tested in manufacturing.
2: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
FIGURE 29-9:
OC/PWM MODULE TIMING CHARACTERISTICS
OCFA/OCFB
OC20
OC15
OCx
Note: Refer to Figure 29-1 for load conditions.
TABLE 29-27: SIMPLE OC/PWM MODE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
Param
No.
Symbol
Characteristics⁽¹⁾
Min Typical⁽²⁾ Max Units Conditions
OC15
OC20
Note 1:
2:
TFD
Fault Input to PWM I/O Change
—
—
25
nsec
—
TFLT
Fault Input Pulse Width
50
—
—
nsec
—
These parameters are characterized, but not tested in manufacturing.
Data in “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
DS61143G-page 170
© 2010 Microchip Technology Inc.