PIC32MX3XX_1 Datasheet, PDF (157/208 Pages) Microchip Technology – High-Performance, General Purpose and USB 32-bit Flash Microcontrollers

PIC32MX3XX/4XX
TABLE 29-7: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.3V to 3.6V (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
Parameter
No.
Typical⁽²⁾
Max.
Units
Conditions
Power-Down Current (IPD) (Note 1)
DC40
7
30
μA
-40°C
DC40a
24
30
μA
+25°C
2.3V
Base Power-Down Current (Note 6)
DC40b
205
300
μA
+85°C
DC40c
25
—
μA
+25°C
3.3V
Base Power-Down Current
DC40d
9
70
μA
-40°C
DC40e
DC40g
25
70
μA
+25°C
115
200
μA
+70°C
3.6V
(Note 5)
Base Power-Down Current
DC40f
200
400
μA
+85°C
Module Differential Current
DC41
—
10
μA
-40°C
DC41a
—
10
μA
+25°C
2.3V Watchdog Timer Current: ΔIWDT (Notes 3,6)
DC41b
—
10
μA
+85°C
DC41c
5
—
μA
+25°C
3.3V Watchdog Timer Current: ΔIWDT (Note 3)
DC41d
—
10
μA
-40°C
DC41e
—
10
μA
+25°C
3.6V Watchdog Timer Current: ΔIWDT (Note 3)
DC41f
—
12
μA
+85°C
DC42
—
10
μA
-40°C
DC42a
—
17
μA
+25°C
2.3V
RTCC + Timer1 w/32 kHz Crystal: ΔIRTCC
(Notes 3,6)
DC42b
—
37
μA
+85°C
DC42c
23
—
μA
+25°C
3.3V RTCC + Timer1 w/32 kHz Crystal: ΔIRTCC
(Note 3)
DC42e
—
10
μA
-40°C
DC42f
—
30
μA
+25°C
3.6V
RTCC + Timer1 w/32 kHz Crystal: ΔIRTCC
(Note 3)
DC42g
—
44
μA
+85°C
DC42
—
1100
μA
-40°C
DC42a
—
1100
μA
+25°C
2.5V
ADC: ΔIADC (Notes 3,4,6)
DC42b
—
1000
μA
+85°C
DC42c
880
—
μA
—
—
ADC: ΔIADC (Notes 3,4)
DC42e
—
1100
μA
-40°C
DC42f
—
1100
μA
+25°C
3.6V
ADC: ΔIADC (Notes 3,4)
DC42g
—
1000
μA
+85°C
Note 1:
2:
3:
4:
Base IPD is measured with all digital peripheral modules disabled. All I/Os are configured as inputs and
pulled low. WDT and FSCM are disabled.
Data in the “Typical” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
The Δ current is the additional current consumed when the module is enabled. This current should be
added to the base IPD current.
Test conditions for ADC module differential current are as follows: Internal ADC RC oscillator enabled.
5: Data is characterized at +70°C and not tested. Parameter is for design guidance only.
6: This parameter is characterized, but not tested in manufacturing.
© 2010 Microchip Technology Inc.
DS61143G-page 157