409-10093 Datasheet, PDF (37/37 Pages) Tyco Electronics – Safeguards are designed into this application equipment to protect operators and maintenance personnel from most hazards during equipment operation

Pin-Barrel Insertion Module 2031100-1
409-10093
7.4. Strip Guide Insert Replacement
NOTE
Make sure that the new strip guide insert is designed for the terminal being used.
i
1. Disconnect the electrical power and air supply from the base machine.
2. Rotate the drag release lever outward until it stops.
3. Push and hold the anti–backup finger until it is clear of the strip guide.
4. Using the strip guide handle, pull the strip guide insert to the back of the feed package (refer to
Figure 8). Remove the strip guide insert.
5. Push the new strip guide insert into the back of the feed package.
6. Rotate the drag release lever inward until it stops.
8. REVISION SUMMARY
S Initial release of customer manual 409–10093
Rev A
Tyco Electronics Corporation
37 of 37