409-10093 Datasheet, PDF (26/37 Pages) Tyco Electronics – Safeguards are designed into this application equipment to protect operators and maintenance personnel from most hazards during equipment operation

Pin-Barrel Insertion Module 2031100-1
409-10093
1. Make sure that the electrical power and air supply is disconnected from the base machine.
2. Loosen the two locking screws that retain the shear lever mount.
Adjust Shear to Bypass Die
Approximately 0.2 - 1.0mm
Tool Set Shown with Die and Shear tooling Fully Extended (Some Items Not Shown for Clarity)
Die Lever Mount
Locking Screws
Inserter Assembly
Shear Insert
Die Adjustment Screw
Die Insert
Shear Adjustment Screw
Shear Lever Mount
Locking screw
Figure 17
(See Figure 2 for Die Insert and Shear Insert)
26 of 37
Tyco Electronics Corporation
Rev A