4082A Datasheet, PDF (4/21 Pages) Keysight Technologies – Parametric Test System

04 | Keysight | 4082A Parametric Test System - Data Sheet
Speciication
Speciication conditions
Accuracy is speciied under the conditions below.
Specification conditions
Temperature
23°C ± 5°C
Humidity
15% to 70% RH¹
Warm up time
At least 60 min.
Self-calibration
Within one hour after calibration
Integration time
Medium or long²
1. 5% to 60% RH (no condensation) for current measurement accuracy of the HRSMU in 10 pA to 100 nA range and isolation resistance of the low-current port
2. For SMU current ranges that are less than or equal to 1 nA, the integration time must be Long (16 PLC or longer). Note: The temperature changes after
calibration must be less than 3° C.