E1976A Datasheet, PDF (31/37 Pages) Keysight Technologies – E1966A 1xEV-DO Terminal Test Application

31 | Keysight | E1966A 1xEV-DO Terminal Test Application - Technical Overview
1xEV-DO Analyzer (Continued)
Time response of open loop power control measurement
Input frequency ranges
Measurement method
411 to 420 MHz
450 to 484 MHz
821 to 934 MHz
1700 to 1980 MHz
Measures the open loop power versus time response of a mobile to
a 20 dB step in the test set’s cell power. User must set the ACK channel
fixed mode bit to Off and set AT directed packets to 0% in order to
achieve valid measurement results
Measurement data
capture period
100 ms
Measurement trigger
Maximum input level
Measurement range
Measurement level ranging
Measurement cell
power step size
User initiated
+37 dBm/1.23 MHz peak (5 W peak)
–46 to +30 dBm (final level after ±20 dB step in cell power)
Auto
+20, –20 dB
Marker relative level accuracy
Marker time accuracy
Measurement limits
±0.5 dB
±540 μs
Time versus amplitude mask per C.S0033
Graphical results
–– Graph
–– Time display resolution
–– Time display range
–– Amplitude range
Available results
Single trace with C.S0033 standard limit lines
270 μs
0 to +100 ms
–5 to +30 dB
Pass or fail result and trace of 371 data points available via GPIB
Concurrency capabilities
None. Selecting this measurement automatically closes all other
active measurements
Packet error rate measurement
PER measurement method
FTAP loopback
PER input level
measurement range
–65 dBm/1.23 MHz to +30 dBm/1.23 MHz
PER measurement
residual error rate
< 1 x 10^-6 for input levels in the specified input level measurement range
and within ±9 dB of the expected input power
Confidence limit range
Definable from 80.0 to 99.9% and Off
PER reported parameters
Intermediate results
PER, number of FTAP packets sent, number of FTAP packets received,
number of FTAP physical packet slots, and number of FTAP MAC
packets received
Final results
PER, number of FTAP packets sent, number of FTAP packets received,
number of FTAP physical packet slots, number of FTAP MAC packets
received, and one of the following: passed confidence limit, failed
confidence limit, or maximum frames
Concurrency capabilities
PER measurements can be made concurrently with all 1xEV-DO
measurements that can run while in a FTAP connection