E1976A Datasheet, PDF (16/37 Pages) Keysight Technologies – E1966A 1xEV-DO Terminal Test Application

16 | Keysight | E1966A 1xEV-DO Terminal Test Application - Technical Overview
Option 102 – Release A and B Call Processing Functionality
(Continued)
(Requires serial prefix equal to or higher than GB4604xxxx or equivalent hardware)
Base station parameters (Continued)
ACK channel bit fixed mode
FETAP mode
MCTAP mode
Max forward packet duration
Call limit
Handoff support
R-DRC fixed mode attribute
DRC length
DSC length
R-ACK channel mode
Session close timer
Configurable attributes
Preferred control channel cycle
Pilot drop
On or Off
Loopback (in physical layer subtype 2)
Loopback (in physical layer subtype 3)
2 to 16 slots. Forces the test set to stop transmission of slots after the
user-set value
Selectable On or Off. When On, the test set ignores all access terminal
access attempts
Hard handoff to a new channel or band
On or Off. Default of On. When in the On state, the test transmits the
user-set forward traffic configuration (determines the rate). When in
the Off state, the test set transmits the forward configuration per the
received DRC value transmitted by the AT
Fixed to 8 slots
User selection of 8, 16, 24. 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112,
120, 128, 136, 144, 152, 160, 168, 176, 184, 192, 200, 208, 216, 224,
232, 240, 248, or 256 slots. Default of 64 slots
Never (all NAK), subpacket 0 (All ACK), subpacket 1, subpacket 2,
or subpacket 3. Default of never
0 to 3240 minutes
Preferred control channel cycle: AT or AN specified Rate 1M8 supported
control: AT or AN specified
AT or AN specified
0 to 63 (0 to 31.5 dB)