E1976A Datasheet, PDF (10/37 Pages) Keysight Technologies – E1966A 1xEV-DO Terminal Test Application

10 | Keysight | E1966A 1xEV-DO Terminal Test Application - Technical Overview
Analog Specifications (Continued)
Audio analyzer specifications (Continued)
(All specifications for the audio analyzer apply to signals present at test set’s AUDIO IN ports)
SINAD measurement
Types of signals measured
Sinusoidal audio signals
Measurement frequency range 100 Hz to 10 kHz
Audio In level range
42.4 mV to 20 V peak (30 mV to 14.1 V rms)
Measurement accuracy
< ±1.0 dB for SINAD < 44 dB
Residual THD plus noise
< −60 dB or 200 μV rms, whichever is greater
Measurement trigger source Immediate
Available result
SINAD ratio
Multi-measurement capabilities 1 to 999 measurements; minimum, maximum, average,
and standard deviation results
Concurrency capabilities
SINAD measurements can be made concurrently
with all analog and audio measurements
Measurement resolution
Typically 0.01 dB
Distortion measurement
Types of signals measured
Measurement frequency range
Audio In level range
Measurement accuracy
Residual THD plus noise
Measurement trigger source
Available result
Multi-measurement capabilities
Concurrency capabilities
Measurement resolution
Sinusoidal audio signals
100 Hz to 10 kHz
42.4 mV to 20 V peak (30 mV to 14.1 V rms)
< ±12% of reading (±1.0 dB) for distortion > 0.67%
< −60 dB or 200 μV rms, whichever is greater
Immediate
Audio distortion
1 to 999 measurements; minimum, maximum, average,
and standard deviation results
Distortion measurements can be made concurrently
with all analog and audio measurements
Typically 0.1%