E1976A Datasheet, PDF (13/37 Pages) Keysight Technologies – E1966A 1xEV-DO Terminal Test Application

13 | Keysight | E1966A 1xEV-DO Terminal Test Application - Technical Overview
1xEV-DO Call Processing Functionality (Continued)
Max forward packet duration
2 to 16 slots. Forces the test set to stop transmission of slots after the
user-set value
Forward early termination state On or Off (default value of Off). When On, the test set early terminates
slots when signaled by the reverse ACK channel
Reverse TCH data rates
(RTAP fixed mode only)
9.6 kbps
19.2 kbps
38.4 kbps
78.6 kbps
153.6 kbps
Min rate = 1, max rate = 1
Min rate = 2, max rate = 2
Min rate = 3, max rate = 3
Min rate = 4, max rate = 4
Min rate = 5, max rate = 5
Reverse link closed loop bit rate Fixed to 600 per second
Reverse link closed loop
power control modes
Active
Alternating – alternating 0 and 1 power bits
All up
All down
Application
FTAP parameter assignment
message contents
ACK channel bit fixed mode
DRC fixed mode value
DRC fixed mode cover
Loopback mode
RTAP parameter assignment
message contents
Test packets
Packet rate mode
Test set configuration
Forward test packets sent
Effect on connection if
application changed
Limited TAP = On
FTAP
RTAP
Limited TAP = Off
FTAP
RTAP
If ACK channel bit fixed mode attribute is on, attribute sent =
ACK channel bit (NACK), if Off then attribute is not sent
FTAP rate
Not sent
Attribute
not sent
FTAP rate
Not sent
Enabled
Enabled
Not sent
Message
sent with no
attributes
Enabled
Min and max
Rate =
RTAP rate
Message
sent with no
attributes
Enabled
Min and max
Rate =
RTAP rate
Yes
No
Yes
Yes
Connection is maintained