D55-B24-3058GDA Datasheet, PDF (8/35 Pages) ITT Industries – 1.0/2.3 RF Connector Series

RF Coaxial Connectors
75 W Plugs
The Type 54 range of connectors has been developed by ITT Industries,
Cannon in conjunction with British Telecom. The Type 54 connector is a
hybrid version of the 1.0/2.3 connector that is used extensively in Telecom
systems in certain parts of Europe and the USA.
The 1.0/2.3 connector interface is now being offered by a number of
Telecom equipment manufacturers because of its smaller size and the
obvious benefits from higher density it offers, when compared with the
1.6/5.6 & Type 43 (SMZ) ranges.
The Type 54 connector combines the 1.0/2.3 interface and locking system
with the termination methods and benefits of the Type 43 (SMZ) connector.
This enables the UK installation market to use the Type 54 connector
without having to re-equip and re-train installers.
The Type 54 range has the standard 1.0/2.3 interface according to CECC
22230 & DIN 47297.
75 W Plugs
Straight Crimp Plug
Push-Pull Coupling
(Packed in Trays of 25)
Part Number
D55-F24-3133GDA
D55-F24-3135GDA
D55-F24-3136GDA
D55-F24-3137GDA
D55-F24-3138GDA
Cable Numbers
BT2003
BT3002
BT5000
RA7000
RA8000
1.0/2.3 - Type 54
~ 35,50
(1.397)
MAX
7,70
(.303)
Right Angle Crimp Plug
Push-Pull Coupling - Press-In Cap
(Packed in Trays of 25)
Part Number
D55-F28-3233A9A
D55-F28-3235A9A
D55-F28-3236A9A
D55-F28-3237A9A
D55-F28-3238A9A
Cable Numbers
BT2003
BT3002
BT5000
RA7000
RA8000
Assembly Instructions BBAI - 1265 - page 23
~ 22,00
(.866)
MAX
7,70
(.303)
~ 22,00
(.866)
MAX
Assembly Instructions BBAI - 1276 - page 25 + 26
Dimensions are shown in mm (inch)
8
Dimensions subject to change
www.ittcannon.com